|05-30-2013 09:28 PM|
Lose any MPG?
|03-04-2013 01:37 PM|
|socalsport||I finally got around to installing my kit. Got about 3 inches lift on the rear and maybe 4 on the front. However my original springs were the 12s so I had a huge case of rake so now it sits really level. Overall I'm very pleased, the Jeep rides fantastic. I decided on 315 duratracs on the rugged ridge wheels.|
|12-04-2012 10:18 AM|
|12-04-2012 09:51 AM|
|pluke the 2||
i got a new numb bud. pm me and i'll give it to ya.
|12-04-2012 07:46 AM|
|12-04-2012 12:59 AM|
LOL! If volume demands it, then we will definitely produce 2.5" coils for the 2-Door. To date we haven't had that many requests for it.
|12-03-2012 06:56 PM|
I want this kit, however, MC doesn't sell the dual rate springs in 2.5" for the 2door, only for 4doors.
Would have totally been down for the Game Changer six pack too...
Come on guys, what happened to the LoC builds that MC is famous for??
I may end up doing a Frankenkit with some other springs down the road.
|12-03-2012 06:12 PM|
I am installing a 3.5 gamechanger metalcloak kit.
On a 2012 rubi, auto, 4 door.
Until now installed:
-front lower and upper control arms
-rear also lower and upper
-front and rear trackbar
Next week hope to install the springs and shocks.
Have to say... it already is really a difference!!!
For pictures: http://www.facebook.com/tony.samana.10/photos_albums
|11-16-2012 10:03 PM|
I ended up taking out the rear bumps tops and going with two hockey pucks up front, and so far so good.
|11-16-2012 06:21 PM|
|pluke the 2|
|11-16-2012 05:27 PM|
The bump stops are adjustable from 1-4" depending on the shocks and the tire to fender clearance. We do you the long travel OME shocks in our kit.
|11-16-2012 04:18 PM|
Driveway slants slightly toward rear. Also that's with Trail Mods removable flares-removed.
|11-16-2012 03:06 AM|
|11-14-2012 06:27 PM|
|11-14-2012 06:25 PM|
Here are some pics of me wheeling in Uwharrie. The first few pics are before and afters. I had MetalCloak control arms with stock springs and shocks (Rubicon) with a TF BB. The after pics are with MetalCloak 2.5 in springs (I gained 3 inches of lift) paired with Bilstein 5100s 16" / 27" front, 15" / 25" in back.
This set up improved my ride drastically, on and off road. On road the suspension absorbs impacts smoothly, while keeping the Jeep well centered. I can actually take 35 MPH curves at about 50MPH now. Off road the Jeep flexes smoothly, out to 2-3 inches more than my previous setup. The Jeep also stays nice and level when off camber, without that "tipsy" feeling I used to get. I could also drive over the terrain at a faster pace, as the suspension kept the bump stops from bottoming out no matter what I threw at them.
Mat, I tried tagging y'all on FB to no avail, so here they are on the forum. Awesome product! I'm very satisfied.
|11-02-2012 05:18 PM|
Hi Combatchuk, had a quick look at your thread, it looks awesome. Did the kit ship with the LT or the Mid travel front shocks. Either way, it looks like you have a heap of bump stop up front, that you may not need for shocks alone, as both have a pretty short compressed length compared to other shocks.
Can you throw a tape measure over it, centre or bottom lip of rim of rim to flare or something, so we get an idea of the actual height.
|11-02-2012 10:26 AM|
|11-01-2012 09:32 PM|
|erik8312||Looking forward to the pics as well. Starting to do some research on lift kits. I will keep this one in mind.|
|11-01-2012 09:13 PM|
I too installed a MetalCloak lift, I went with the 2.5" Game Changer lite. The instructions were crap (and incomplete) but the hardware is great and it rides really nice. I have a few pictures in my build thread if you'd like to reference them.
|11-01-2012 05:21 PM|
I will take a lot of pics as I install the lift and the results. Still need a few little things like a Procal, and an exhaust spacer, Bolt kit etc. Decided on machined rugged Ridge rims with the black rim protectors and Toyo 295/70/17 Toyo MT's.
Thanks Will, I will let you guys know how it all goes. Thank you for being so prompt with the email replies too. I will probably have more questions as I flesh out my build.
|11-01-2012 04:09 PM|
You are going to have your kit way before your jeep. You might just have to drive that car some more.
|11-01-2012 03:12 PM|
|kramer2k||^ Sounds like you're going to have a badass setup. Looking forward to seeing it.|
|11-01-2012 03:04 PM|
|opalgem||I'm new and still waiting for another month for my Jeep. After lots of research online I ordered the gamechanger 3.5" from Metalcloak. I wanted bigger tires then realized I needed to get this and that to compensate for everything. I seen the bent joints on some brands of lifts. Liked the on road and high speed capabilities of this MC lift according to all the YouTube videos. I watched them all like the Terraflex guy is good. But I ended up going for a full package that included everything upper and lower adjustable control arms etc. along with those special looking shocks! HeHe I like the way thy look in the videos. So far I have a set of lights and 36" tires on black rims. They were only 5" back space so I ordered .75" hubcentric spacers to fit tires with lift. Sleeves gussets balljoints warn 9.0RC MC stubby. HiD's +LED back up light. Now I'm wondering about fitting the spare and the correct bump stops for the stock fenders. Jeep won't be here for another 4.5 weeks they estimate. I've been ordering stuff for 6 weeks. I can't afford to wait any longer. haha|
|11-01-2012 12:19 PM|
|11-01-2012 11:30 AM|
|kjeeper10||I would paint them red so peeps think I have a Rancho or skyjacker lift lol|
|11-01-2012 11:25 AM|
This version of the Kit is $1499.
JK Wrangler Dual-Rate Lift Kit, 2.5"/3.5", ARB Edition
The gold is a zinc coating so that they don't rust. They can be painted over if you really wanted to but everyone love Gold.
|11-01-2012 11:23 AM|
|pluke the 2||1500|
|11-01-2012 11:20 AM|
|11-01-2012 11:18 AM|
|mackdj1||What's the cost on one of those lifts?|
|11-01-2012 11:15 AM|
|pluke the 2||
i personally like that gold color.
|This thread has more than 30 replies. Click here to review the whole thread.|