|12-28-2008 08:52 PM|
|orange05tj||did you try hitting the wrench with a lump hammer? I had to the first time I took mine apart. I used a socket wrench with the torx bit and held it in place, then put a 18mm open end on the nut and hit with a hammer, came off after a few smacks.|
|12-28-2008 06:34 PM|
|Jma20a||yeah any normal hardware store should have everything you need. make sure that everything is grade 5 or better. i used grade 8.|
|12-28-2008 05:47 PM|
|maddmax91||it looks like thats what im gonna be doing then, where can i find those pins, ace? menards?|
|12-28-2008 05:36 PM|
x3 here is the link
Jeep Homemade Swaybar Disconnects
when you do get the swaybar unbolted use a jack on one side of the axle and jack it up as far as you can so the other side is down far enough to the point where the spring just falls out.
|12-28-2008 05:27 PM|
|12-28-2008 05:05 PM|
|NalinMFG||if worse comes to worse you could grind the head off, pop it out, and do the cheap quick disco trick... think of it as an opportunity to upgrade|
|12-28-2008 04:40 PM|
having trouble with my spacer install
So my dad and I started working on my skyjacker 2 inch spacer lift this morning, and now its 4:30 and we're completely stuck. the bolt the instructions tells us to loosen, is completely stuck. we cant loosen it so removal is completely stopped. after this it should be relatively easy to atleast get the spring out, or atleast ive read that here. what would you guys recommend for my next step?
its the bolt on the bottom, ive got the starhead, some penetrating oil, it just wont budge.
('97 tj 4banger)