|01-15-2013 11:46 AM|
There are more than "2 wires" coming out of the module. There is the mini USB connector and a 22 terminal connector which runs thru the IP harness and isn't easily removed. You'll need to purchase the harness PN 68002648AA. Then your best bet would be to bu an external mounted mic unless you swap out the "A" trim panels and run 2 wires from the mic to the module.
|01-14-2013 05:34 PM|
How do I remove microphone from my Jeep?
I have two jeeps. One with bluetooth, one without. I am trying to take the uconnect out of one and put in into the other. I have located the uconnect module and there are two wires coming out of it. I know one is the USB (i'm ok without transfering it. The other I'm guessing is the Microphone. I am trying to remove the panel that the mic is attatched to without breaking it. Please help!!