|02-06-2013 10:20 PM|
|SilverSport||What are the current numbers on your coils?|
|02-06-2013 04:05 PM|
|scottmphoto||So what size coils could I get to retain the original height?|
|02-04-2013 09:05 PM|
|TrueBlue||I have a 2013 jku sport s with stock coil and after adding front and rear bumpers and a winch, I can see a noticable drop in height and can also feel it when driving. The jeep is not as "bouncy" as it was when stock. So now I'm also looking into better coil to rid that heavy feeling of the jeep. So is RK spring coil good if I just want a more heavy duty spring without the lift?|
|02-04-2013 08:39 PM|
|SilverSport||All springs will settle some from when they are new aftermarket included. Hence why 2.5" springs often provide a bit more lift when new.|
|02-04-2013 07:17 PM|
|02-04-2013 06:24 PM|
|scottmphoto||Well I don't remember the P/Ns but I remember that the JKU springs were stiffer (higher number). And, I moved everything from my 2010 to the '12, so all the weight was transferred at once. And the ride height has dropped over time...hence my belief it is sagging. Nothing has been added, yet the height had decreased.|
|02-04-2013 11:05 AM|
|02-04-2013 10:17 AM|
|daggo66||Your coils aren't sagging, you just have added additional weight. Telling us that you have "JKU" springs means nothing. You need to give the comparison part numbers.|
|02-04-2013 06:20 AM|
|OffRoadCam09||If you really want to get coils, I'd look at something like rock krawler or aev which have progressive rate springs instead of linear which hold weight better. But an easier an cheaper solution would be to buy a 1" spacer an install that to get your desired height|
|02-04-2013 12:36 AM|
Help with Coils
Hey everyone -
I have a '12 JK Rubi with a TF 2.5" kit (w/shocks). I also have JKU springs.
I think they are sagging (winch, hardtop, bumpers) may be the culprit.
I would like 1" more lift.
Which coils should/could I get to give me 1" more and stiffen up my Jeep's posture? AND, can I keep the TF shocks?