|02-10-2013 10:15 AM|
Soak your upper rear shock bolts heavily with PB Blaster..... DAILY~~~
Don't forget the RTV to seal the case halves...
And a GOOD set of lockring pliers AND snapring pliers... you may need both
also you will need a 12mm 12 point socket for ONE bolt.... I know.. stupid.
When doing the breakdown and assembly... pay particular attention to the oil pump and pickup tube.... you don't want to damage it or in the end, have the pickup come undone from the pump.
|02-10-2013 10:05 AM|
Getting ready to install new adjustable rear upper and lower control arms, adjustable rear trackbar, AA SYE, Tom woods DS and rear shock relocator brackets. Is there anything else i will need, besides fluids, before we tackle this next weekend? Just want to make sure i have everything the first time. Thanks