|02-23-2013 09:32 AM|
Synergy is tops IMO.
Yes you can run in the stock location. Nothing is required. Bolt right up.
To flip you need the adapter ($10) and the knuckle drilled from the top.
Edit: and obviously the track bar bracket which raises the TB 3".
|02-23-2013 09:22 AM|
|Williard86||can anybody recommend a better alternative to the synergy draglink flip?|
|02-21-2013 01:46 PM|
Wobble, Steering Gear and new Draglink
I experienced an episode of death wobble the other day and the problem has been identified as a bad steering gear box (leaking), and both ends of the draglink. There are no signs of wear on the track bar, tie rod or ball joints yet.
I need a new draglink and would like to eventually go to a high steer set up to get rid of the drop pitman arm. I need to get the jeep driveable so I was thinking of ordering a synergy suspension draglink. http://www.synergysuspension.com/Syn...nk-p-16410.html
It says that it can be used in the stock configuration. Anybody used it in the stock configuration and then moved it to a high steer set up? What else is required?
Anybody recommend a different draglink or high steer kit. Money is pretty tight with the move but any suggestions are welcome.