|04-15-2014 01:47 PM|
|bflank||My element doors came with adapters for the OEM mirrors. Takes about 5 min to put the mirrors on the doors.|
|04-14-2014 10:04 PM|
|04-14-2014 04:21 PM|
|04-14-2014 04:19 PM|
|ARWillys||Here's what I got: http://www.amazon.com/Rugged-Ridge-1...ror+relocation|
|04-14-2014 03:27 PM|
Has anyone tried these for the element doors yet? the price is nice
Replace® CH1320102 - Jeep Wrangler 1987-1995 Driver Side Door Mirror (Manual, Paintable)
|05-24-2013 11:32 AM|
|JeepHerz||Those will work then. Thanks!|
|05-23-2013 10:49 PM|
|05-23-2013 02:26 PM|
The whistling on the Lange might bother me. Looking for something in the middle- not huge like OEM mirrors but not too dainty either. I hate to be accused of being dainty.
|04-15-2013 10:42 AM|
Can't beat it for ~$60.
|04-15-2013 09:42 AM|
I used these (Bestop 51262-01 HighRock 4X4 Black Replacement Mirror 86-06 Wranglers : Amazon.com : Automotive) on my new Element tube doors. Worked great, good price and fit like a charm. I am really really happy with them. I still have my Lange QRII mount for when I want to go truly doorless.
|04-15-2013 08:30 AM|
I used a Lange Quick Mirror II on the driver side - and I couldn't stand it and wouldn't recommend it to anyone. I might clamp it somewhere on my riding lawn mower so I can get visibility or something - but I won't use it on the Jeep. I could never get it really tight (at the mirror end of the arm) - so I had to literally move it into place every time I wanted to use it, and the whistle was more than just slight to me.
I replaced it with a Defiant Systems mirror this winter, but I haven't gone doors-off this year so until I actually USE it, I'm not going to promise it's much better. In any case, the Defiant won't work with Element doors as it mounts to the door-pin-hinge-socket-thingie.
|04-15-2013 07:53 AM|
|04-14-2013 10:13 AM|
|Timjeep||Go here http://www.wranglerforum.com/f33/bes...ew-230843.html. for Kramer2k's review of bestop doors. He sourced some mirrors for the doors. I bought mine from the place he recommended. The mirrors look factory and are easy to install on the doors.|
|04-14-2013 09:55 AM|
(1) No person shall operate any motor vehicle upon a highway unless such vehicle is equipped with a mirror so located as to reflect to the operator a view of the roadway for a distance of 200 feet to the rear of such vehicle.
(2) No person shall operate on a highway any school bus having a passenger-carrying capacity of 10 or more persons including the operator unless such bus is equipped with at least one mirror which is 7 inches in diameter so located as to enable the operator to see a reflection of the road from the entire front bumper forward to a point where direct observation is possible.
(3) No person may operate or permit the operation of any motor bus on a highway unless the bus is equipped with 2 outside rearview mirrors, one to the right and one to the left of the operator. Each mirror shall have not less than 50 square inches of unobstructed reflective surface and shall be firmly supported and adjustable to give the operator a clear view past both the right and left rear of the bus.
History: 1975 c. 84; 1987 a. 235.
|04-14-2013 09:36 AM|
I have used the Lange mirrors in the past and I liked them.
The do get whacked pretty hard by branches when off road. It knocks them out of adjustment at the stem sometimes. I kept the Allen wrench in my glove box to fix it.
There is a slight whistle as well. I was able to minimize it by adjusting the mirror stem I got used to the whistle after a couple of days.
|04-14-2013 09:13 AM|
|wiscosolid||Do the brackets f up the paint on the side of the windshield?|
|03-05-2013 10:19 AM|
|Moabite||I just ordered a set of the Lange Quick Mirror II. There is a small bracket that stays on the windshield frame and the mirrors can be removed with the twist of a knob. There is supposedly a different stem available direct from the factory that improves passenger side visibility. I'm waiting to hear back from them on that. I have the Bestop 2-piece soft doors.|
|03-05-2013 10:06 AM|
Bestop 51261-01 - HighRock 4X4™ 03-06 Factory Styling Replacement Mirrors for 87-13 Jeep® Wrangler YJ, TJ, JK, TJ Unlimited & Unlimited JK - Quadratec
Bestop 51258-01 - Bestop Mirror Mounting Brackets for 76-06 Jeep® CJ-7, CJ-8 Scrambler & Wrangler YJ, TJ, Unlimited with Bestop 2-Piece Doors - Quadratec
I used these for my bestop full soft doors. Even though they don't say they are made for a jk they will still work. For the plates, one goes on the inside and the other goes on the outside. I am not sure of the design of the element doors so I would contact the bestop rep here. The element doors seem a little different than mine. Check out this thread I found, I am guessing these are the doors you have so you can get an idea of the mirrors mounted on them. http://www.jk-forum.com/modified-jk-...ent-doors-810/ . I think they are on a tj but you can get an idea of how it will look if those mirrors are compatible with element doors.
Or, you could get mirror relocation brackets and move your factory mirrors from your doors to the body of the jeep but you will loose some visibility on the passenger side.
Or you could use these Rugged Ridge 11025.10 - Rugged Ridge Quick Release Mirror Kit for 97-13 Jeep® Wrangler TJ, JK, TJ Unlimited & Wrangler Unlimited JK - Quadratec and attach them to the jeep whenever your element doors go on if you don't want to move your OEM mirrors
|03-05-2013 09:57 AM|
Mirrors for Bestop element doors?
Just got a set of Element doors for my '08 JKU- can I use the OEM mirrors off of my factory doors, or is there a better way?