|03-08-2013 11:15 AM|
|rubiconvict05||Yes, I mean the triangle pieces. I really like my stock fenders with the 6 inch pocket flares but really like vent in the fender well. Thank you. I will contact metal cloak and see what I can come up with.|
|03-07-2013 12:06 PM|
|aTX427||The Jeep is sprayed with Superliner, a bed liner produced in Austin. On the vents, are you referring to the front fender triangular pieces? If so, they came with the Metalcloak fenders. I would imagine they can sell them separate, but you would have to call them to be sure.|
|03-07-2013 11:26 AM|
Very nice. A few questions.
What do you have for the paint on yur rig?
do you know if the fender vents are sold seperately?
|03-07-2013 11:17 AM|
Metalcloak rear fenders and Savvy Corners play nice together
I decided to add corners after my flop and went with Savvy aluminum crossing my fingers that they would play nice with my Metalcloak rear fenders. While I was at it, I decided to go with the Savvy aluminum tailgate plate as well. I already had the Metalcloak fender mount, so all I needed was to transfer the holes and mounted the fender adapter to corners. The next step was to trim the corners to fit up to my Metalcloak rocker rails. Fortunately, very little was needed to make them work. Buzzed them with a cutoff wheel and I was in business.