|03-13-2013 03:12 PM|
|Reaper2332||Yeah sorry guys, I didn't get any hits on this one, so I reposted in a different section. Thanks for the help. It ended up being the rear lower control arms that I forgot to re torque.|
|03-13-2013 01:25 PM|
|kbwwolf||We're beyond the re-torque stage. OP must've double-posted: Need Help with DW|
|03-13-2013 01:16 PM|
|jwann01||Did you re- torque everything while you jeep was on its own weight, off jack stands?|
|03-13-2013 12:15 PM|
|03-13-2013 07:36 AM|
|jrussblues||I would look at the upper shock bolts as they are a pita to install and may be rattling. Also, did you unbolt control arms to install the lift?|
|03-09-2013 09:21 PM|
Feel a shift in front end.
Hey guys and gals,
I recently installed a Teraflex 2.5" coil lift. After the install, I made sure to torque all control arm bolts to the correct ft lbs and the trackbars both front and back. After that I took it for a test drive and noticed that when i stop quickly (For example I am stopped and let my foot off the brake to get a slight roll and slam on my brake) I feel something shifting in the front end. I have been googling this issue for a couple hours now and have found no information. Any help would be greatly appreciated!