|05-07-2013 04:47 PM|
|05-05-2013 09:59 PM|
|05-05-2013 09:11 PM|
|05-05-2013 12:46 PM|
I just put in ARB lockers and used their new twin compressor. It works great! I mounted it on the fender where the jack used to be mounted.
|05-03-2013 09:49 PM|
here is where my ARB is mounted:
However I don't think this one has enough power to pump up tires. I would love to be able to pump up my tires but i think the larger pump wouldn't fit in the same spot.
|05-03-2013 09:26 PM|
|05-03-2013 05:10 PM|
|AirWerkz||If that location under the booster is the same as the TJ, it will. I would imagine they would be very similar, but I have not checked to confirm. I will try and locate a YJ to find this out for you.|
|05-03-2013 12:04 PM|
|05-03-2013 09:55 AM|
We have a new mounting bracket we are working on that will mount a 400C to the TJ's under the booster there. It will also be part of an OBA system or can be used for just a compressor.
Still have some work and test fittings to do, but should be ready in the next few months.
|05-02-2013 11:53 PM|
|SuicideSaints||Really late reply... I have it mounted by the brake booster brown in that little cubby space. I had my old one there too but this new one is bigger and a lot tighter fit but it worked.|
|03-29-2013 08:38 AM|
Thats a legit kit there!
I gave the wrong part number earlier. It is 20007 not 27000. That is for a 380C with a 2 gallon tank. But you have to buy all the extra goodies that AIRWerks has pictured separately.
|03-29-2013 02:42 AM|
A little late but figured I would post up an option. The VIAIR ADA is a good choice, since it has the small reservoir and uses a 400C compressor. The 400C is large enough to fill 35's and even low pressure 37's. The ADA has the right pressure for the lockers, so you just have to plumb the solenoids right in, and you are ready to go.
VIAIR ADA Heavy Duty Universal 40049 - Onboard-Air.com
|03-22-2013 09:31 PM|
Do not waste your money on ARB Compressors.
What you want is a Viair kit. I chose part # 27000. 2 gallon tank with 380c compressor that will run 100% duty cycle @55psi.
|03-22-2013 07:16 PM|
|Mewing8||do you have any pictures on the compressor install? I have mine mounted on the driver side rear wheel hump inside the cab. Not really happy with that location. Thanks|
|03-21-2013 10:39 AM|
How large is the twin compressor? Mine will be here Monday and I am wondering where the best place to mount it would be. I am running metalcloaks and was thinking if possible mount it on the inner fender.
|03-15-2013 11:59 AM|
|rykemc||Thank you Saint. That was what I was looking to go with. Cowboy, I have not totally ruled out having AC on my jeep so I am going to keep it functional for now but thank you for the link|
|03-14-2013 05:12 PM|
If I was in your position I would run an OBA setup with an extension to the air manifold for the lockers.
Like this link.
Stock AC to OBA conversion
|03-14-2013 03:34 PM|
|SuicideSaints||I run the ARB Twin Compressor, I pump my tires up pretty quick (35in tires). I do not use tools at all but I pump um the occasional air matress. My old pump went out recently and I switched to this. It is kinda expensive 400-500 depending on the deal you get. I havent used it too much, it gets kinda warm (not like my old one did) when doing my tires. I have it mounted in the engine bay. I have seen people use the high output for tires, it does take a little longer (2-5 min) for tires but it works. I am not sure of the life expectancy of the compressors for filling but they do work.|
|03-14-2013 01:27 PM|
Compressor 4 Air lockers.
So I am running front and rear ARB lockers. Need me a compressor to run them. Wondering if I should just get one of the ARB compressors and then do something different to air my tires back up via CO2 or a OBA or just get the OBA and run my lockers off of that?