|09-05-2013 05:38 PM|
You gotta have cupholders.......
|09-04-2013 08:47 PM|
|5hBlueYJ||Did you finish this and did you add cupholders?|
|05-21-2013 05:02 PM|
|Nundian101||What a cool idea!|
|05-21-2013 11:00 AM|
The past few days I have worked on the mount. For now it will be wooden because I don't have the tools to work in metal but eventually I will make a metal one. So I made a box and then scribed the curves of the tub and cut it out
Then I proceeded to adjust the cuts so it would sit level in the tub
Yesterday I put the final coat of paint on so I will have pictures of it painted some time later. Hoping to get it completely installed today when I get home from school
|05-07-2013 07:38 AM|
Got the hinge finished yesterday. Took a little elbow grease but with a hammer and a punch I was able to bend the tabs in.
Here is a view of the hinge from the inside even though it is hard to see. And also one of it open. It doesn't stay open I am holding it. I will have to get something to hold it open or just deal with it.
|05-03-2013 10:25 PM|
|vawt33||Subscribed. I have been wanting to do this for a long time, and now I am in between projects. Looking forward to seeing the progress and hearing other peoples suggestions. Good luck with it.|
|05-03-2013 09:28 PM|
Well today was a great day I started cutting the fingers for the hinge. I just used a dremel tool with those cutting wheels. Worked pretty good except for the fact that the wheels break up really fast
After. I also started cutting the lid for the fingers to go into
Planning on finishing this part tommorow and then start on the next part
|05-01-2013 09:20 PM|
I got my ammo can today
I am going to start working on it and will turn this into my "build" thread for the console. When I got it I looked at it and couldn't think of how to hindge it so I would enjoy directions or pics to do that. I am hoping to start tommorow and will take lots of pics because as far as I know I haven't seen complete directions to make one. So hopefully I will help any future console makers.
|04-28-2013 11:33 PM|
|SuperMidget||the wife's is hinged just by grinding down the top lip on the back L that the lid sits into to allow it to open to about 80 degrees or so and the plate on the back handle you would pull up to open that end is bolted down... don't have any pics of it but its pretty simple|
|04-28-2013 08:42 PM|
Ordered an ammo can today should be here friday or sometime next week... Just gotta get some steel to make brackets and something to use for cup holders I kinda have a plan in my head on how it will turn out but nothing ever goes the way you want it so we will see
The can I ordered is a 20 mm and the lid comes all the way off. Does anyone know how I can make it hinged? I have a few ideas but would like an "experts" opinion
|04-25-2013 10:01 AM|
Yet another Ammo Can Project (finished!) - JeepForum.com
|04-24-2013 09:49 PM|
|04-24-2013 07:22 PM|
|04-24-2013 07:44 AM|
|04-23-2013 10:52 PM|
i'm lazy, the ammo can in the wife's mud toy is mounted to 2 pieces of old sign post that run from right behind the floor shifters to the floor at the rear seat, going to mount cup holders in front and behind the console
you can kinda see the rail here
|04-23-2013 10:12 PM|
Edit: ok after measuring my console and then looking at ammo cans I think I will go with the 20 mm one. It is slightly shorter than my current console but I t is also taller so it is about the same storage space. I still would like to see pics and would like advice on the mount. I am not able to weld so it will need to be bolts or something easy.
Something along the lines of this:
Unless you have other/better ideas. Also would like ideas for cup holders.
Thank you all for your help.
P.S. sorry for all of the grammatical errors I am typing on my iPad and autocorrect is stupid sometimes
|04-23-2013 08:43 PM|
|Mountain goat||I have been thinking more and dupe died that an ammo can would be cool and it would go with my granade shifter handle. But I am not sure what size. I have seen plenty. Of threads about it but have not seen many pictures. I would love to see pics of anyone who has done this. So I can brainstorm some more.|
|04-01-2013 01:05 PM|
|04-01-2013 07:09 AM|
|03-31-2013 09:25 PM|
|Mountain goat||Cool thats good I found one like 30 min away from me. Now I just have to find some time to get over there and get one|
|03-31-2013 09:02 PM|
There are some around here most on the Missouri side of the City
Pick n Pull I think in Independence.
|03-31-2013 08:57 PM|
I am hoping to have comfort and a little security... I won't be keeping too much in it so security isn't top priority
I have read some thread on here that sais that console sucks is that the one you are modding?
I would love to see what mods you make. I was planing on getting that one until I read the bad reviews so that's why I decided to mod/make one.
Thanks for the input btw
|03-31-2013 07:10 PM|
Just some input.
What is the purpose of your console?
-Security? Go with some thick steel and a hardened pad lock
-Arm Rest/Comfort? You could use the plywood, fiberglass, and foam for padding.
Just my two cents. I'm looking to customize a console because I have one that came w/ my Jeep and it has a lock and it's made out of plywood so it's not very secure (Vertically Driven Products 41511C - VDP Deluxe Ultimate Console for 76-95 Jeep CJ & Wrangler YJ - Quadratec). Ammo box w/ a padlock would be more secure.
Also you should use self tapping screws to screw into the floor.
|03-31-2013 09:41 AM|
Sweet thanks for the replies. Do you know of any pick a parts near Kansas City?
I have thought about it a little more and I do agree that plywood would take up space so I was thinking of finding one and modding it for my needs. Which aren't complicated (4cup holders and tall enough to be an arm rest) and eventually if I decide to get a subwoofer I would like the option to fit one in the console.
So if you know any pick a parts near Kansas City let me know. Or if you have a console you want to get rid of pm me and we can talk about a trade or something.
|03-30-2013 10:58 AM|
|Beachcruiser||I'd take a trip thru your local pic a part auto yard....you might find a usable console for a few bucks that could be adapted w/ a little blocking on the bottom. Pretty easy to spray/dye it black, or whatever.|
|03-30-2013 09:56 AM|
You do not have to contour the bottom to exactly fit the floor... at least not side-to side. There are other options. I have a console I have bought and installed. I saved up the money to buy a Tuffy security console... heavy metal deal. Glad I waited.
But like you, I thought long and hard about actually building my own. The approach I was considering was to start by removing the seats... at least one of them so you can see what you are doing. It is not hard. Two bolts from the top, two from underneath the jeep. Determine front-to-back profile for the side fo the box. It doesn't have to be full contact, as long as it sits steady. The floor of the console can be raised up to clear the rounded hump section. From the end, the floor of the console would be suspended between the two sides like the crossbar of a capital "H."
The width of the console is important. If you make it too wide, it will crowd the seat and seat belts. I recommend putting some kind of strap to secure the seatbelt so it doesn't get trapped between the seat and the console.
One of the things that turned me away from building my own was that I wanted something secure enough to put stuff in and know it would be there when I got back. I travel with 3-4 GoPro cameras, a couple Canon cameras, GPS, etc. About the only way I could have come anywhere close to the strength of this Tuffy console would be to build something out of metal plate. When I figured materials and welding, it was going to be about as expensive as just buying one.
The other thing is that the plywood that I was originally thinking about using was a lot thicker than the commercial consoles... so I would have paid a penalty on storage volume.
I am interested in seeing what you put together.
|03-29-2013 12:00 PM|
Hey everyone I am looking to upgrade my console but I a on a budget and want to get the best bang for my buck. I was looking around and of course all the onesies like are 80 $ and up so I was thinking why not build one.
I have been looking for a thread with a custom console but all I found was the ammo can one. But I was thinking more along the lines of plywood and/or fiberglass. So if anyone has built their own plywood console I would love to see some pictures.
After I got this Idea I realized that the floor is not flat so I will have to contour the bottom of the "box" this is the part I think will be hardest so pictures of this or any ideas on how to go through with it would be helpful. Also how would you mount it? A bracket or just use the factory holes? Any ideas?
Thanks for your input and once I decide what to do I will try my best to keep you updated with pics and steps.