|04-28-2009 09:42 AM|
Wait 32x11.5's though.
Do you have a body lift or just the suspension? I was talking to Dirk at DPG about fitting 35's under my junk with the OME kit and a 1.25bl. I think I might and if it doesn't fit I'll just add a 1" puck.
|04-28-2009 08:11 AM|
|erickpl||I have 33x12.5's on my stock Canyons with an OME lift. BUT I do have Spidertrax spacers.|
|04-28-2009 06:31 AM|
|04-28-2009 05:33 AM|
|TeeJay||Not all stock rims are 7" wide. Canyons, gamblers and moabs are 8", but still present back spacing issues.|
|04-28-2009 02:27 AM|
|crazyredneck||there is no problem running larger width tires on a 7 inch rim, but the rubbing will be your issue.|
|04-28-2009 02:20 AM|
I honestly wouldn't go any wider than a 10.50 tire with the stock 15x7 rims. You can find them in 31x10.50x15 and possibly even a 32x10.50x15 however most of the 32's I've seen are in an 11.50 width.
The main problem is with the stock rims excessive backspacing. It's fine with the narrower tires, but when you branc out to the larger sizes you start rubbing on the frame in the rear and on the control arms in the front.
|04-27-2009 10:35 PM|
Lift Kit with stock rims... help!
I own a 2006 Wrangler X with stock rims of 15 inches. i want to put a suspension lift of 3 inches on but be able to keep my stock rim size. If I did this, what size tires would be big enough but not too big for the stock rims? Help!