|09-21-2014 03:44 PM|
|09-21-2014 08:46 AM|
|Tx 91 YJ|
|04-21-2013 10:26 AM|
|SBL||Thanks for all of the replies. Some great looking rigs out there.|
|04-16-2013 07:15 PM|
|JScullz||Another Rugged Ridge grill insert. $50 with shipping off amazon. Easy DIY install. You do have to drill 4 holes.|
|04-16-2013 04:46 PM|
Gluing the loop things on...
|04-16-2013 04:16 PM|
Here's a photo of mine when finished. Each insert is a separate piece of metal held in by three screws/flat nuts.
I also included link to installation instructions so you can see it from the inside. http://www.grillcraft.com/installs/i...install_id=227
|04-16-2013 03:56 PM|
I don't know about using screws...
I did expanded metal in one piece. Attached it the same way as almost everyone else.
Scraped the tape off the back of the plastic loop connector things, wiped everything down with Brake Kleen, and glued on the loop things with Gorilla Glue. Some minor trimming around the edges to clear factory pinch seams and AC components were required for the one-piece. Relocated the temperature sensor back to clear the insert.
It's been on over a year without anything becoming unglued.
I used gold anodized expanded aluminum because I happened to have some, and I think it looks good with the Natural Green Pearl. The anodizing is holding up really well.
Pic in my profile.
There was a pretty detailed instructions thread about this a year or so ago.
|04-16-2013 09:50 AM|
|SilverSport||Here's my DIY insert.|
|04-16-2013 08:47 AM|
|04-15-2013 03:41 PM|
i have one too! no pictures though.
i'll grab one later =) have it on a bright silver, think it looks awesome!
|04-15-2013 03:36 PM|
I did this to my jeep and loved it. But, after 4 months, most of the connectors have come undone. I thoroughly cleaned using rubbing alcohol and i used gorilla tape over the connectors. I suppose when I re-do them, i use epoxy?
|04-15-2013 03:04 PM|
Here's the unpainted version of the Home Depot parts mod.
|04-15-2013 02:48 PM|
There are several brand name kits available as well as DIY things that people have done with parts from hardware stores, such as Home Depot. Here's my Metalcrafters grill insert.
|04-15-2013 02:29 PM|
Not sure if this is what you're talking about but it's made by Rugged Ridge. It is a heavy grate type of wire mesh that is black powder coated. It is pressed into a contoured shape that conforms to the grill openings. That makes for a nice fit but also makes it very stiff, which you would not get from just a flat screen placed across there. They're about $50 from RR and it's a easy do it yourself install.
It's worth it to me to keep that stray 70mph rock out on the highway from comming thru and hitting the radiator.
|04-15-2013 02:07 PM|
expanded metal grill. who has one??
Someone posted pics a while back of attaching expanded metal behind the grill with self tapping screws. I searched all over but can't find.
Anyone have pictures of this???