|04-19-2013 05:52 PM|
|Ole4Cyli||Got the recommendation sheet from them. Replacing plugs/wires/cap/rotor would be $71.49, $104.25 for labor. I'll just find a youtube video on how to do it myself. Thanks guys!|
|04-19-2013 05:10 PM|
|Plowboy1970||I did cap rotor wires and plugs on my 4 cylinder for under $50 and it took me an hour. Only because one of the cap screws broke off and I had to pull the distributor to drill out the bolt. If you can clean the IAC you can do your plugs.|
|04-19-2013 05:07 PM|
|Notoriously_rob||Ask around for paul boyden- if u are in pcola- he will do it for u cheaper.|
|04-19-2013 05:03 PM|
If you were a bit closer I'd come & give you a hand.
|04-19-2013 04:51 PM|
|Ole4Cyli||How hard is it to change them out? The only experience I have on working with parts is when I cleaned my throttle body and IAC.|
|04-19-2013 04:45 PM|
|Notoriously_rob||Do it urself- its 1 hr total worth of work!!!|
|04-19-2013 04:42 PM|
So I brought my 98' to the shop this morning to see what was causing my rough start problems, and I called them back after school. They told me it ran pretty much perfectly, but it could use tune up on plugs and wires. They also said that the thermostat on the engine needs to be replaced. In total, they want to charge me $300. Too much? Or sound right?