|04-22-2013 10:48 AM|
|04-21-2013 08:52 PM|
|dawhitesJKU||Very impressive. Great job|
|04-21-2013 08:22 PM|
Finally got them done. First I sandblasted them then primed them with a standard auto paint primer through a paint gun.
Then I under coated the backs of the wheels.
Then I wet sanded them and primed them again using rustoleom primer in the cans.
Then I painted them with rustoleum gloss black paint.
Then finally, 2 coats using rustoleum clear coat gloss.
The finished product. There are a couple imperfections if you look close at the edge of the rim. I'm very happy with the way they came out and they look 100 million times better than before. By the way I sprayed the clear coat heavier around the lug nut holes because this area sees alot of wear tear from tightening lug nuts. And I also bought center caps from the local auto parts store. Overall, its an easy and fun project and was alot cheaper than having them powder coated!
|03-21-2013 10:48 AM|
Are you spraying out of a gun or doing a rattle can job? If it's out of a gun I would suggest a single stage paint just to make future touch up work easier. The argument could last for ages about which brand of paint system is best but that's neither here nor there.
If spray can job, I would assume DupliColor's wheel paint line may be a good place to start? Good luck, post pics of your results!
|03-20-2013 07:05 PM|
I just sandblasted and primed my steelies, what do you guys think is the best type paint to finish them with? Im looking for a high gloss finish.