|04-23-2013 02:27 AM|
|Grizzlycb||It makes the sound in gear out of gear clutch in or out. But when going slower no noise. I replaced the drive shaft u joint in the back a few weeks ago. I'm hoping the t case drop will stop it. Ill put it on in a week when I get more days off. I'm hoping that's the problem|
|04-22-2013 02:59 PM|
|Charley24||It makes the sound when the clutch is in and/or when in neutral? When in gear with the clutch out it doesn't make the sound?|
|04-22-2013 02:20 PM|
good job on the install, man what a difference. Looks good!
For the sound, you may have a bad u joint that wasn't to bad with the previous angle but is not happy at the new angle. Check those first... Aside from that its really hard to tell without hearing it in there. Wish MI and KY wern't so far apart lol.
|04-22-2013 05:50 AM|
|Grizzlycb||Well my before during and after pictures got scrambled around (iPhone app) but I'm sure y'all can figure it out. Now to my question after driving it around in high speeds my tranny makes almost a grinding sound or something sounds like its right under the stick its self. That's when it's in neutral or the clutch is in.. It runs and drives fine just makes that weird sound any suggestions? Oh and it don't do it when it's slow just at like 25 or faster the faster I'm going the more it makes the sound ?|
|04-22-2013 05:46 AM|
Finally finished my lift!And some questions..
So I finally finished my rc lift I did 1inch rc shackles and 2.5 rc lift.