|05-09-2013 06:12 PM|
|Billmummey||This is what I ended up with not my best welds its been a few years since I've had to make bumpers but I know it penetrated|
|05-07-2013 11:16 PM|
Mine went on in less than 3 hours (Q-tec 9000) on the stock bumper, which I needed for towing behind my MoHo.
Very pleased with the install, but couldn't use the stock, or aftermarket D-rings, due to a weird hole mismatch. 1/4" off moved the mounting plat by 1/2 " forward!
I'll figger out the geometry and report on it later this week.
I know that this is a very popular winch, and Q-Tec is ready to help me with my problem.
It has something to do with the factoy mounts, during the transition,
The winch is on, but looks a bit "hinkey", setting over the factory mounting bolts.
I know I won't have any problems with shear, but what If I need air support?
|05-07-2013 04:17 PM|
|theYeti||Lol okay just making sure I wasn't in for a huge surprise when I bought my winch|
|05-05-2013 11:05 PM|
|Billmummey||I still need to get my hands on some 2" x 1/8" tubing I can make a stinger out of... I got it done enough to be functional though|
|05-05-2013 11:02 PM|
|Billmummey||Cause I built mine from a pile of steel I had from other projects, lots of welding grinding and cutting but yes once I was finished making the bumper and winch plate I then painted them and it was a simple bolt on.... Total cost...0.00 + cost of a new winch|
|05-05-2013 08:38 PM|
|theYeti||Why is it taking hours? Don't you just bolt it to the bumper run the wires through the grill and connect to the battery?|
|05-05-2013 08:00 PM|
|Billmummey||Just finished them I broke a battery terminal.... It never ends|
|05-05-2013 01:17 PM|
|AllMudd||When you reply or post to the thread there should be a + sign at the top of the screen or click advanced tab and you can that way also.|
|05-05-2013 12:43 PM|
Almost finished mounting my winch
A couple more hours and ill be finished finally!how do I add photos?