|05-14-2009 10:53 AM|
This may help. I just replaced mine this weekend and it helped me alot. Warn 6-inch Fender Flare Install
Or you could try here. How best to remove stock fender flares? - JeepForum.com
|05-14-2009 10:46 AM|
|ccain||Quadratech and 4Wheel Parts sells the replacement fender flare hardware. If worse comes to worse, you could take a pair of wire cutters and clip the plastic nut across the middle where the screw comes through then replace them with the new ones. This is what I had to do on my YJ to get the old flares off.|
|05-14-2009 10:30 AM|
|T-BONE N BIXBY||Are you removing them to replace them, or to paint them?|
|05-14-2009 09:34 AM|
|Darton||It's a major PITA for the rear flares!!|
|05-13-2009 11:12 PM|
|n8smitty||you have to reach behind and hold the plastic clip while you loosen the screw. On the back ones you'll have to remove the wheel well liner to get to them. Hope that helps.|
|05-13-2009 11:03 PM|
I am trying to remove the Fender Flares from my TJ. I have the front driver side off... but the rest all have screws that are not coming out...they are spinning behind the fender wall.
Any suggestions???? Thanks!