|08-03-2013 05:46 PM|
|Meshugga||I don't have any trouble with mine. It might be because with 6" of lift I can hold the doors at a comfortable height to put the doors on.|
|08-03-2013 09:49 AM|
I made mine from a brass nut used in cheap furniture filed down to the correct diameter. It is a M6 x 1 thread if your looking through your junk box.
A guide on the upper hinge makes it easy to align the pins, also I carry and place the doors from the outside to see the pins better. That way also puts me between the mirror and the cowl.
|08-03-2013 08:41 AM|
thanks for that idea...heading outside with the hacksaw
|08-02-2013 09:57 PM|
|Billy Baldone||Yes, but I leave them on all the time.|
|08-02-2013 07:40 AM|
|4WDGroceryGetter||It appears to me they get screwed on the top bolt of the door pin and then removed after installation if one wishes to use the nut/bolt to secure the door with that pin. Does that sound correct?|
|08-01-2013 06:47 PM|
|Billy Baldone||update: I have installed them, and yes, it makes a huge difference, the whole process is easier. well worth the money|
|08-01-2013 04:40 PM|
|D_ninja||$30 seems a little steep.|
|08-01-2013 04:20 PM|
I for one feel the doors on our '13 JKUS are a pita!
There is no place to grab them from the inside. You need to grab it from the inside of the window frame and below the door itself to steady while putting the doors on without scratching the paint.
My '82 CJ and '93 Wrangler were a lot easier and the doors weighed about half as much.
|08-01-2013 10:17 AM|
|mistergreentree||Why not just cut a bit off the bottom of your lower pin and then ease the edges with a grinder if necessary. I did this on a TJ that I had a few years back and it worked great.|
|05-12-2013 09:51 AM|
|05-10-2013 03:44 PM|
|Billy Baldone||I ordered them today. I like the rounded edge. It appears as if it won't chunk up the paint on the door.|
|05-09-2013 02:53 PM|
|sparky||They could be useful, but I agree they are not worth the price.|
|05-07-2013 11:56 AM|
|steve_plunkett||I hope somebody buys them and posts about it. Im curious but curious enough to buy them myself|
|05-07-2013 11:36 AM|
|SHADYDC||Im sure they do help if you have them, but i dont think they are worth the money, the doors are really not that hard to get on and off. maybe if they were few bucks i could see it|
|05-07-2013 11:08 AM|
|05-06-2013 11:27 PM|
|CarolinaBound||As long as I'm not still feelin' the effects of a Friday/Saturday night with the rugby boys then I would hope I can align two sets of pins. $30 is a good bit of gas money.|
|05-06-2013 10:57 PM|
|05-06-2013 09:02 PM|
|Z-TJ||I don't see how they would be that much help. I also think you could find something at Lowes for less money.|
|05-06-2013 08:36 PM|
EZ door pin guides
Has anyone heard of these or used them? Just saw them on quadratec