|05-21-2013 01:37 PM|
|UnlimitedLJ04||I use a M10x1.5x75mm Class 12.9 (8mm allen drive) because it can be torqued to a higher value to prevent hole wallowing. You can use a Class 10.9 flange nut on the back if your flag nut is jacked up.|
|05-21-2013 01:28 PM|
|s14sh3r||SCREW, Truss Head, M10x1.5x75, Track Bar to Axle, Mounting, part number 06503981|
|05-21-2013 12:51 PM|
Need proper bolt for front Track bar
I have destroyed this bolt and need to replace the OE front track bar bolt on the axle side.
Looking to put a hex back in.