|08-30-2013 10:27 PM|
|Get your jeep on||
|08-30-2013 02:12 PM|
AF1 Auxilliary Brake System
We tow our 2013 Sahara JKU behind our motor home. I have had the AF1 system on all of my toads. The system works flawlessly off of the air brake system on the Motorhome. I would recommend that the RV dealer install a braking feedback light on your dash to let you know when the system is applying the brakes. They can also wire in an LED light that would attach near the rear view mirror of the Jeep that you can see in the rear view camera in the RV.
The system is super easy to connect once installed. A single air line between the RV and the Jeep, a coiled bungee for the break a way switch and your 7 pin electrical cord.
|08-17-2013 12:13 PM|
|Get your jeep on||We just got back from the RV dealer, trying to learn how to put a base plate on our 10 A, blue ox makes one that fits well below where our winch is. Will post pictures once it is installed In a couple of weeks. They recommended an Air Force one integrated brake system. Has anyone ever heard of these? If so, what are your thoughts? We had a break buddy system in our last vehicle, and stopped using it because, well, it didn't work half of the time. Thinking a built in break control is the way to go, would love feedback from the experts.|
|07-25-2013 04:50 PM|
|Kevin1959||I just received my BlueOx base plate (2013 Sport) Attempting install in the morning. Ordered a Ready Brute Elite Towbar with brake built in the unit. Pretty slick looking.|
|07-22-2013 12:34 PM|
|parker65||The Blue Ox doesn't do away with the skid pan. It does however trim it on each side for clearance. I just finished installing the BO last week. It does the job, but I do wish something similar to the Currie rock jock was available for the 10A bumper.|
|07-21-2013 12:54 PM|
Tow Brackets for 10a
I see now that box Road Master, and Blue Ox are making tow brackets. Just picked up our 10A yesterday and starting to do my homework.. It looks like you will have to take that protective pan off underneath the bumber and possibly leave it off. I do not like the idea of that but maybe someone will make brackets that are integrated with the protective pan.Have about a month to solve this.
|05-31-2013 12:57 PM|
|05-31-2013 10:29 AM|
FLAT TOWING Bracket Picture for the 2013 10a
Here is a picture of the the one I built for the 2013 10th Anniversary Rubicon.
|05-23-2013 08:39 AM|
Glad it works for you.
I'm going to wait on the new Blue Ox plate designed for the 10A. That way if something ever does break loose, I can refer back to BO for assistance with damages. With the modified/unapproved plate, they will simply state that it's modified or not used on it's intended application and deny any responsibility.
Also I want to retain the front lower skid. It acts as an air dam and helps keep hood flutter away.
I'm not knocking what you did by any means. I strongly considered this myself. After pondering the nature of the litigation happy society we live in, I decided not to leave an opening for liability on my part if an accident or failure should occur. I've even contemplated building one from scratch to suit myself, but again, I didn't want the liability if an interstate mishap occurs.
|05-22-2013 10:36 PM|
|05-20-2013 07:14 AM|
|05-17-2013 08:46 AM|
|INCALS2LJ||wondering if anybody has put front tow bar brackets on on there 10a yet? wanting to use my blue ox bar. any info or pics would be great. thanks|
|04-05-2013 02:19 PM|
I saw that. To tell the truth I prefer replacing the air dam with this steel plate as opposed to trimming the plastic to fit around the Blue Ox base plate.
|04-05-2013 10:21 AM|
|Mody n Domy||Sorry don't know how to post picks will have to learn some day. The part I had to trim was on the bottom of the frame on each side it stuck down about 3/8" below the frame I used a cut off wheel and let it cool and the painted it. You do have to remove the plastic air dam to install it.|
|04-04-2013 12:17 PM|
I'll have to see if it will cooperate with the new 10A bumpers. Currie doesn't know since they haven't seen one.
Their website says trimming neccessary with 2010 and up. What did you have to trim?
I've got everything else covered. I ordered the Blue Ox base plate to try when the Jeep gets here in the next week or two, but they don't know if theirs will work with the new bumper either. I like the looks of the Currie online, If you could post some pics I'd really appreciate it.
For "my" wiring of the tail/brake lights I'm using Mopar#82211156AB. It's a little pricey but I like the way it integrates.
Tow brakes - I have an air brake coach so it's M&G braking systems for me. I've used it before on my '01 Cherokee and it's excellent. I tried the SMI Airforce One on my '11 Grand Cherokee, I prefer the M&G 2to1 over that set-up.
|04-03-2013 09:00 AM|
|Mody n Domy||I tow a 12 JK and use the Currie Enterprise Rock Jock tow plate, Blow Ox tow bar and there Patriot breaking control, Cool-Tech wiring harness and Toad charger wiring to keep battery charged while towing. Just follow the owners manual for proper tow procedures and I don't leave key in ignition. The total price will depend on the cost of the tow bar and base plate. For your own safety and the safety of others make sure you have a toad breaking system it is a law in most states that you have one.|
|04-03-2013 12:14 AM|
|Rude Dog||Look around on craigslist for a tow bar. I found a pretty good one (Falcon II) for a third of the cost from some older folks getting out of RVing. Came with the security cables, pins etc and front bar. The bar wasn't for a jeep, but I copied the basic design and fab'd one up out of a piece of angle iron. It's mounted under the bumper. I use the Harbor Freight plug in magnetic style lights, everything works great.|
|04-02-2013 07:42 PM|
There are several popular towbar manufactures. I use a Roadmaster Sterling which is the high end of that line.
You'll have to check the prices on line and decide what you can afford.
Big difference in quality from the higher end set-ups to the bargan stuff so don't cheap out if you can help it (and... don't go to Camping World unless you want to pay a lot more).
My bar runs about $800, the base plates around $400 and then the rest of that stuff will add up to another 3 to $400.
Jeeps are pretty east to do the base plate yourself but if you don't have that capability that will further add to the cost.
|04-01-2013 05:42 PM|
|04-01-2013 05:30 PM|
Tow bar and base plate, you have several choices and prices. Personally I use Blue Ox, I prefer the design and ease of use. They are also more out of the way as far as base plate design and I prefer the asthetics. Their customer service is excellent and they offer free inspection and tow bar rebuild services at rallies.
Jeep offers a harness to wire the taillights over the counter. There are also other choices.
A good place for info on flat towing is the forum, IRV2. Lots of info in the dinghy towing section.
|04-01-2013 05:20 PM|
I just traded up to a larger Class "A" and am planning on towing our 10 Rubi unlimited. What hardware do you have to tow your Jeep and the total approximate cost if you don't mind.
|04-01-2013 09:49 AM|
|03-31-2013 11:14 PM|
|Marc W||You don't. They no longer have a steering lock. I flat tow mine behind my RV and remove the key. Did that with my previous 2011 also. You just have to be sure to go thru the pre-tow procedure that's in the book.|
|03-31-2013 11:02 PM|
|Dextreme||I know on my TJ, it needs the key in the first click forward to keep the steering wheel unlocked. Your manual should let you know why for the JK.|
|03-31-2013 09:21 PM|
I will be flat towing a 2012 wrangler manual.why do you need the key in