|06-28-2013 12:18 AM|
Teraflex also makes a very similar "leveling kit" for about $130. It gives you 2" spacers in the front and 1" in the back. The AEV 2" BB is 2" in the front and I think it's 1-5/8" in the back. I don't mind the rake, so besides price AEV would likely be my choice of the two.
From what I have read, I would guess you axle would shift about 1/8" to 1/4" @ 2" lift. At 2.5" of lift 1/4" to 1/2" axle shift. At 3" the axles can be 1.5" off as shown in a teraflex video.
You might want to check out this DIY option. I'm not sold on it just yet.
|06-27-2013 10:41 PM|
|PAPADOC||Oh this is exciting times my friend...as soon as you start in on the mods you will be addicted. Like getting a first tattoo maybe?? Haficon's pics are pretty fricken sweet...so go with the "built not bought" concept. I did the same fender cuts on stock and they look great...even made my own mods to the directions with the gear that most will tel you to remove when doing a flat fender cut. Way better and stronger. I was in the same boat as you...yet I don't have a lick of automotive experience in my life. After one year I am comfortable taking on any project or mod myself. I will post a couple pics of my rig now...and after I install my own 3" lift as well. My downfall was buying Mud Terrains to replace the lame touring tires it came with...so money wasted because now I would go a completely different route with the mods I've made. I have yet to fail in any one project or mod. Good luck and just go at it mang...youtube is your reference friend, all to taste of course. My favourite story is buying a 25k+ vehicle...then buying a $40 reciprocating saw and cutting into it for the first time. Cheers|
|06-27-2013 10:09 PM|
Well I have to say Call Jason at Krawl Off Road they offer a Law-A-Way program. They have quality products at good prices that allows you to pay month by month then once paid.. new parts in the mail..
Look around on here should be easy to find pictures of 33s and no lift on flats.
Not what you asked for but.. here was mine with stock cut fenders and 32.2" stock tires. With no lift I did have rubbing at full articulation.
Now my 34.4 with no lift..
I have since added a 2.5" lift with 1" body lift
|06-27-2013 06:23 PM|
If you want a little clearance check out the Rancho 2" sport. Front coils and rear spacers. 4 9000 adjustable shocks. People are snagging this kit for $300-$400 after the rebate. Rebate ends June 30'th though...
2" won't require track bars or CA's geometry wise.
|06-27-2013 06:02 PM|
|06-27-2013 04:54 PM|
I think I personally would go with a 2.5" teraflex budget boost (BB) over flat fenders. If you have plans to do a proper coil lift later with 35"+ wheels, I can see how you would rather do the flat fender direction. With flat fenders and a 2.5" lift and 33" wheels it may start to look like roller skates. My personal opinion is that without some lift, the 4DRs look a bit dumpy. The BB would also help with the break-over angle and stop a bit of rubbing skids. Being that you don't have much added weight it wouldn't sag much. It also wouldn't give you lots of extra lift like a coil lift.
ESP said that his 3/4" daystar coil spacers were not enough for his 33", if I remember an old thread right. I would think it would be tight with just flat fenders, and make sure to get a definite answer that it will work.
33" does seem like a sweet spot for wheels. When you go up to 35" it starts costing more with all the extras needed. Re-gearing, new spare tire carrier or hinge, more lift needed, possibly reinforcing the axle C's.
|06-27-2013 02:56 PM|
Critique my plan...
I'm not one for planning, nor do I have much in the way of patience when I want something (as evidenced by the JKUR in my driveway) However, I haven't yet found a money tree. So, here's "phase I" of my build plan. Wanted ya'll to check it and see if any of my assumptions are wrong before I drop dough. Never had a Jeep before, let alone modified one
I have a stock 13' JKUR. It's my DD and I plan to off-road 1 -2x per month (nothin' crazy at all). Ultimate goal is a full-on Lift with 35's and all the other goodies that will make it "mine" and a bad ass vehicle.
Ok, here's what I'm thinking for now.
Thanks for any thoughts.