|06-29-2013 07:20 PM|
FYI I find Googling what you want to do is a big help. There are a lot of videos on the internet that are invaluable.I have been working on cars for40+ years and I sttill find these things helpful.
|06-29-2013 01:03 PM|
|impulse250||Lol ya. Def be some of that going on. Ya I got plunty of time. My tranny is getting rebuilt right now. So I figure while its apart ill swap all that stuff|
|06-29-2013 12:49 PM|
|jokerchief462||Plan some time for the job like a full day at least. When you get your parts ask about a ball joint press to rent most parts houses have them available. And then have some patience, but the good thing is there are times during the job you can vent a little with a BFH and hurt anything.|
|06-29-2013 12:07 PM|
|impulse250||Thank ya thank ya!!!|
|06-29-2013 12:04 PM|
One of the better sites out there..
D30 Ball Joint Replacement - 1
|06-29-2013 12:01 PM|
Changing ball joints
So I have never actually attempted to change ball joints or axel universals .... Was just curious if there are any threads out there with tricks to do it. I've heard it's a pain. But thought I could read up on it