|08-17-2013 07:07 AM|
|08-15-2013 10:15 PM|
|08-15-2013 10:12 PM|
you have 2 other nuts that will work just fine
yes, there is a joke in there somewhere but I am referring to the 2 nuts on the battery terminal!
|08-15-2013 10:06 PM|
|Sixpack||Just hooked up a remote switch for my lights today and used a 10mm OD fine thread nut I had lying around.|
|08-15-2013 09:53 PM|
|gsn||I measured with a caliper and its 6mm. And accidentally touched both ends of the battery with the caliper|
|08-15-2013 07:56 PM|
These M6 nuts are what I used on mine.
Freightliner Thomas Built Buses TBB 132076 Nut M6 Pack of 10 Free Shipping | eBay
|08-15-2013 07:27 PM|
|Scott2373||Anybody? I finally got my lights installed but can't hook them up...|
|07-07-2013 12:13 PM|
|07-07-2013 11:34 AM|
|Scott2373||I looked around on the etherwebs a bit and the only thing I could come up with was an M6x1. Does that sound correct? Although the thread looked too course. Thanks!|
|07-01-2013 05:56 PM|
|rapdragon||sorry don't remember the size but I had the same and just ended up taking one of the nuts off the positive side into ACE and just got one that way.|
|07-01-2013 05:53 PM|
|06-30-2013 10:22 PM|
Battery terminal nut / thread size
Any of you that snoop around under your hood have no doubt noticed that there is a "naked" post on the negative battery terminal. Well, this looks like a gee golly swell place to hook up my auxiliary lights, except there is one problem - NO NUT! Any one know what size threads it is? Of the ass-load of nuts in my tool-box, none fit properly. Thanks a bunch!