|09-16-2013 12:50 AM|
|Nickabis||I run a Ford Taurus 2 speed fan with flex-a-lite adjusted controller on my 2.5.|
|09-15-2013 11:54 PM|
I like this design, but have become very dissatisfied with Derale. Within a week of installing the fan, The fan stopped working. I found that the temperature sensor went out. I was able to jumper this connection so the fan ran all the time the switch was on. I replaced the temperature sensor with one I bought from jegs.com. About a month later, the relay went out. I was on vacation out on a trail ride so just hard wired it to a switch (I know, bad practice, but it worked). A couple weeks later, the fan motor locked up.
Quadratec offered to exchange it... but I am done with this thing. I bought a fan from a Ford Taurus and have bolted it on and using a fan controller from Painless Performance. It uses the same type thermostat switch, so one component is ok.
|07-01-2013 08:44 PM|
|Ibuildembig||I sell them to forum members for 175. All you need is a temp sensor.|
|07-01-2013 07:54 PM|
|07-01-2013 07:12 PM|
|Ibuildembig||Mark 8 is the baddest fan made. I have sold over 120 kits with zero failures!|
|07-01-2013 07:02 PM|
|06-30-2013 05:35 PM|
|Magnumu||yes the original radiator for the 4.0|
|06-30-2013 05:16 PM|
|06-30-2013 04:56 PM|
|Magnumu||I'm using a lincoln mark 8 fan and shroud. Fits perfect and keeps the 4.3 vortec as cool as I want. It is a two speed. I have it set up with an adjustable thermostat probe that goes inside radiator hose. Have used both speeds and low seems to work fine.|
|06-29-2013 10:28 PM|
|06-29-2013 10:11 PM|
|Jeep_Monkey||Running derale fan bought from quadratec. I like the temp sensor better than shoving a probe into radiator fins.|
|06-29-2013 09:35 PM|
|06-29-2013 09:29 PM|
Electric Fan - Anyone Running one?
If so what type? Aftermarket? Or picked from something else? Just looking for some ideas.....