|09-02-2013 03:46 PM|
|Ditchdoc||How's the engine swap going?|
|08-12-2013 02:56 PM|
|jeepnfool||Goyette, check out Novak adapters site or call Dave @ ext 14 and he can tell you everything you need.|
|08-12-2013 01:31 PM|
|07-05-2013 08:29 AM|
I used the stock Jeep fuel pump and just ran a Line from the pump to the truck rails
I kept the stock jeep Pcm and used the 53 PCM
used a Truck K&N setup without the heat shield
I used the novak fan
used a fan from a V6 4th gen Camaro
|07-04-2013 11:53 PM|
|Rwa||Just finished putting 5.3 L33 chevy in tj used both jeep and chevy pcm's.|
|07-04-2013 10:01 PM|
|Trailblazing1||Pulled that from the Novak site.lots of info there|
|07-04-2013 10:00 PM|
|Trailblazing1||•The NP207 & NP231 transfer cases are adaptable to the TH700R4 by using #171 series adapter kits.|
|03-20-2013 10:11 AM|
|03-18-2013 11:29 AM|
I'd have to take another look at it, but I do want to put a cam and springs into it. I read a build online from carcraft magazine and they gained over 90hp with just the cam.
Have you seen or heard of anyone who has piggybacked a 5.3ecm with the factory wranglers?
|03-15-2013 04:26 PM|
|03-15-2013 03:36 PM|
|goyette09||I can pick up a 700r4 with torque converter $600 reman with 2 year unlimited mile warranty. and its easier to convince the fiance that the build is a good idea if she is able to drive it when its done...|
|03-15-2013 03:17 PM|
|Morris4x4Center||Instead of going Auto why not T56 6Speed? You will need a bigger Fuel Pump for sure!!! MSD-2225 Fuel Pump (We have them, good to about 500HP).|
|03-15-2013 01:37 PM|
5.3 vortec build summer of 13'
Well plan is to put my 5.3 vortec in my 97 wrangler se. I've got the motor and a big list of things I soon plan on buying. Can you help me out with things I may be missing....
Headers idk what to buy
700r4 mechanical (less electrical the better in deep water I figure)
original t-case. (np231) I believe.
beef up the front and rear axles. 30 spline with detroit lockers.
fuel pump? will stock 4cyl work for stock or cammed 5.3?
I know I need an adapter for the tranny to t-case. Im interested in piggy-backing the engine ecm to the wranglers computer to save money and sticking with the belt driven fan. Can you help me with my "parts list"?