|07-21-2013 09:01 AM|
|eboven||2footin is correct, if there are three wires or more on the lights, you probably have a light with selectable patterns; often times one of those patterns is steady burn. If it's a three wire setup than you usually need to pulse the third wire with a ground or positive signal while the light is powered up with the other two wires.|
|07-15-2013 11:21 PM|
|2footin||if they have more than 2 wires should be good|
|07-15-2013 04:19 PM|
|Wranglin4Life||I doubt it, there meant to strobe... Having them stay on is probably not good for them even if you can get them to stay on all the time.|
|07-14-2013 07:50 PM|
So I went to the local junkyard and picked up 3 15" led lights, come to find out there flashers.( like on a volunteers firefighters vehicle) My question is, is there a way to make them not flash, and just run constant?