|07-22-2013 10:54 PM|
|Buz 1||i got a 'remaned from autozone 4 140$s + core..|
|07-22-2013 10:45 PM|
Well and fluid of course...possibly a pitman arm puller.
|07-20-2013 06:22 PM|
|wipke||Alright fellas This the whole thing any thing else i need to add to this? More Information for ATSCO 7525|
|07-18-2013 08:12 AM|
|00TJSport||I just replaced mine the other day. Bought a reman from NAPA. Cost was $144 + $55.60 for core, which I returned that same day and got core charge back then. My shop charged me $70 total to do the work. Mine was starting to leak pretty bad and steering got very loose. The swap made a big difference in sloppy steering!|
|07-18-2013 07:52 AM|
The box was actually cheaper from Napa for once. It was around 150...when everyone else in to town was more in the ballpark of 200.
|07-17-2013 10:11 PM|
|wipke||I went to go start this project but i got to auto zone and they wanted like 500$ for the gear box assembly witch seem kinda $$$$$ is there any where I can order it online?|
|07-16-2013 07:02 AM|
|joeinajeep||If your pitman comes off without a hassle, you can swap it in 15 minutes. It help to have a buddy hold it while you bolt it up, it gets heavy if you take too long...|
|07-15-2013 11:41 PM|
|07-15-2013 10:04 PM|
|wipke||Ok cool how hard was it? scale 1 to 10?|
|07-15-2013 07:37 PM|
|07-15-2013 07:36 PM|
|Water Dog||I got my new stock one from Napa. They would have the Durango as well.|
|07-15-2013 07:11 PM|
|wipke||Yea new would be great might I ask where you got yours at?|
|07-15-2013 06:56 PM|
Doesn't hurt to upgrade to the Durango box. Might as well go new (reman) if you are going to do it I just did this last week.
From what I read, rebuilding it isn't a for sure fix and that replacing the seal is a lot harder than replacing the whole box.
|07-15-2013 06:53 PM|
power steering gear box leak
Well guys this ones really got me going through a loop should i get a used one of a dodge durango (i believe) try to find a new one, or rebuild it?