|08-31-2009 11:59 PM|
|Provelogear||For sure! I have broke plenty. In case you break one and can't find a replacement. You can get a small zip ty and it work fine for keeping the line inserted. Just kind of a pain to take off.|
|08-31-2009 11:51 PM|
|N39-W120||NAW... not an idiot.... Lesson learned!|
|08-31-2009 11:35 PM|
|Provelogear||I heard you can get replacement clips from Napa. I have yet to verify.|
|07-13-2009 10:34 PM|
|dbbd1||I bought a another set of the 4 lines that run along the top of the tank from a jeep junkyard (for the 2nd time also). Now, I have spares. Anyone need some of the smaller ones? The large one for the evap can is the one I broke twice.|
|07-13-2009 10:28 PM|
|Levinoss||I had soo much sand built up in my clips I almost broke them trying to figure out how to take them off. Had to get out from under the jeep and take a break and when I came back they magically came right off.|
|07-13-2009 10:25 PM|
Okay, So I Am An Idiot
After taking my gas tank down for the second time (in prep for the Savvy skid) and breaking one of those (many) fuel line clips, I found out something interesting that I thought I would pass on.
Here is a shot of one of those clips
Here are the clips that I thought you had to undo (the black things)
To get it to look like this, to release the tube
Well, I found out, if you press on this round half-moon part
It goes from this
To this (you can barely make out that the "jaws" have opened)
Now, just pull off.
I find this out after I broke my 2nd clip on the evap can. Hopefully, I can spare someone else the pain.