|08-20-2009 09:16 PM|
|G54||Huh. Okay. I'll see what happens. It didn't look possible, but I guess I was wrong. Thanks.|
|08-20-2009 04:46 PM|
If you go to their web site (EMP), the installation instructions talk about how to deal with a body lift. Sounds pretty straight forward.
Extreme Metal Products, LLC
|08-20-2009 03:42 PM|
|08-19-2009 09:15 PM|
I prefer sliders welded to the frame. Much stronger.
But don't yours mount on top of the body mount bushing? Can't you throw the new spacer under the slider mount?
|08-19-2009 08:10 PM|
|Ironman||AtoZ fab also only attatches to the tub. I ran a 4" strip inside the tub for reinforcement.|
|08-19-2009 05:57 PM|
|G54||Here's a pic of the Rokmen's. I could try to fab something similar with the EMPs by removing the steel at the body mounts.|
|08-19-2009 05:53 PM|
Rock Sliders and Body lift
Okay, so I guess I screwed up getting the EMP sliders since they mount to both the body tub and bolt to the frame at the body mount bolts. (Similar to Poison Spider rockers I think) Now I want to add a JKS 1.25" BL and I don't think it will work with those sliders. The only thing I can figure is to cut off the steel where it mounts to the frame, then drill new holes and mount it to the underside of the body - thereby making them only body mounted sliders. Either that or sell them and get the Rokmen Merceneries which will work with body lifts since they don't mount to the frame.
Anyone have any other ideas?