|09-26-2009 11:19 PM|
my tranny has the fill plug on the passangers side, it isn't not an allen bolt it is a hex head and it has a wire comming off it that goes to a plug, and the drain bolt is a hex head bolt too.
i have a 98, does this sound right? hopefully because i swapped out the fluids and drove it around today with no issues.
|09-26-2009 07:28 PM|
|09-26-2009 07:24 PM|
|Cannonball||How often should the tranny fluid be changed?|
|09-26-2009 07:01 PM|
|Fire Wrangler||I have a 1997 4.0L...Do I have the AX-15 that is pictured?? I think I need to add some fluid.|
|09-22-2009 03:30 PM|
your trans will take a little more than 2 qts. i've found that what is recommended is mopar part # 0487446, but i have also seen that guys use pennsoil synchromesh and royal purple synchromax.
|09-22-2009 03:28 PM|
|mudslinger150||^^Jgano - Thank You very much this is exactly what i was looking for!|
|09-22-2009 03:19 PM|
|mrcarcrazy||color me stupid, but I have an 01. is same true? and do I need 3 or 4 qts of syncromesh?|
|09-22-2009 03:11 PM|
the drain plug is located on the bottom closer to rear of transmission.
the fill plug is located on the side about 1/2 way back. on the passenger side
|09-22-2009 03:10 PM|
does this help?
|09-22-2009 03:06 PM|
Manual Transmission Fluid Change (another one)
If i could get a picture or a diagram of the fill and drain plugs for this task that is all i need.
maybe some crafty work with a picture and the paint program
its an AX-15
what do you think, it'll take about 30 minutes or so huh..