|09-27-2009 10:28 PM|
Use a drywall screw-screw it in a couple of threads-pull out the center of the retainer.
|09-27-2009 05:41 PM|
|SoCal147||I drilled mine out|
|09-27-2009 04:00 PM|
|Badfish||yea i used a knife to get under em and then some needle nose to pull them out|
|09-27-2009 03:17 PM|
|daggo66||Supposedly you can slip a flat head under the lip and pull up as you unscrew the fastener. I couldn't do it without strip the head of the screw. I ended up just yanking them out and buying new ones from the dealer parts department.|
|09-27-2009 03:11 PM|
Removal of front bumper plastic fasteners?
Someone backed into the front of my 2007 and put a big dimple in the right side front bumper contact point. I figure I can push it back again if I can get the bumper off but I have a problem. How in the heck do you remove the small plastic fasteners that hold the plastic pieces on the bumper. They have a Phillips head slot on them but you can turn them till the cows come but they won't unscrew. I suspect that they can be pryed out like the fasteners that hold door panels on but I hate to try it until I am sure. So, can someone tell me how to remove these things.