|10-14-2009 08:19 PM|
The MML is also good to avoid bad rear driveline angles when you install a suspension lift.
|10-14-2009 03:12 PM|
|10-14-2009 02:58 PM|
Most usually incorporate the BL along with a MML (Motor Mount Lift).
If doing the BL only, you'll have to adjust the fan shroud so the fan doesn't dig into it now that your raising the body up.
|10-14-2009 01:45 PM|
|jdhallissey||Nope. The BL is frowned on for the most part over 1.25". Your good at that level. I wouldn't go much higher. They tend to look ugly too since there will be a gap between the frame and the body. They do serve a purpose tho, to let you add tummy tucks and skid plates on the bottom of the rig.|
|10-14-2009 01:22 PM|
JKS 1.25 lift
im new to off roading, sounds like this is the body lift i want to put on my TJ just wondering if im going to need anything else to make everything run and shift properly besides the kit