|01-27-2007 10:46 PM|
|01-27-2007 05:39 PM|
|affende||there are multiple aussie lockers in my club. all the owners say they wont wheel with anything else. i am putting them in f/r of my 97 TJ.....|
|01-27-2007 02:34 PM|
I just installed one in the front and the hardest part was getting the carrier to stay in the vise good(small vise) . Also what worked best for me in getting the carrier out of the housing was using two pry bars on a upper and lower ring gear bolt, heres a picture of what Im talking about: http://www.stu-offroad.com/axle/d30seals/seal-5.jpg . and put something soft under it or have someone ready to catch it just in case it falls out fast when you do that.
Here is a couple write-ups that I bookmarked:
and a fluid capacity chart:
I printed out the one from 4x4xplor when i did mine.
Also I can here the clicking sometimes when I turn slowly which isn't that bad but "they" say it goes away after a while. I'm testing it out tonight so I'll tell you how it does offroad.
hope that helps some...
|01-27-2007 02:10 PM|
Aussie Lockers.....PROS vs CONS...ease of install?
I just purchase a pair of Aussie Lockers for my 2001 TJ. Dana 30 for the front and Dana 35 for the rear.
Should have em in a couple weeks.
I am just curious if anyone has any thoughts????
Good or Bad.