|08-04-2010 11:32 PM|
A lot of people tap the wire that energizes the ASD relay (auto shut down relay)...it controls a lot of crucial things needed to start the Jeep...starter, fuel pump, etc. There's a write-up for this kill switch somewhere...do a search for I think it's ADE kill switch.
Here ya go:
If you're just doing your own quick one...it doesn't really matter (some people do starter kill switch, others do fuel pump kill) as long as the switch is properly rated to handle the current going through it or you use relays to do the switching.
|08-04-2010 11:19 PM|
|08-04-2010 04:18 PM|
quick killswitch question
ok so i've searched the forum but can't seem to find an easy write up. which wire should i tap into? the constant 12v, the ignition, or the starter? Ill do a write up with pics when complete