|02-11-2006 04:25 PM|
|jeepmutt||Banks TorqueTube manifold doesn't have expandable joints, but it does claim a lifetime warranty and is now available for the 4 cyl. Another option may be the Pacesetter Armorcoat Header.|
|02-10-2006 08:11 AM|
|pharmacist25||ANyone know where I can find a manifold for the 2.5 L engine that has the expandable joints? I can't find it anywhere. Only for the 4.0|
|02-10-2006 03:53 AM|
I used this company for my replacement on my 98 4.0. Received in 2 days, lifetime replacement warranty, and all the parts you need for the install. Looks like $89.00 shipped for your application.
I replaced mine in about 2.5 hrs, fairly easy, just take your time.
|02-09-2006 09:52 PM|
|pharmacist25||No only have the 2.5L. ANyone have the $100 range replacement? How do they do?|
|02-09-2006 09:16 PM|
|jeepmutt||They all crack, even the new improved version. Forget welding it. Buy headers. Have a 6 cyl, right? Hedman plain black are cheap, reliable and may net a hp or two gain. If you have basic tools you can do the install. A creeper to get under the Jeep is nice b/c you will have to get to a couple of the bolts from below and a creeper is like working while laying on your couch. I wasn't stoked about the cardboard gasket provided by Hedman, so you may want to find a better gasket on your own.|
|02-09-2006 09:08 PM|
|khenderson||i'd say replace it with the newer crack resistant ones since they have fixed the problem. i know jerry has gone through a bunch before getting it replaced with the new one, and hasn't had a problem since. and it's something you can do yourself with a little time and some standard tools.|
|02-09-2006 08:14 PM|
Cracked exhaust manifold
I have confirmed my worst fear tonight, a cracked exhaust manifold. The bad part is I have a 2000 TJ, the year they were supposed to have fixed the problem. Anyway, I want to do it myself. Never done anything liek it before and looking for advice. Don't want anything fancy. Should I lookfor a 2000 replacement since they are supposed to be OK? The cracks look pretty big to me, don't know about welding. I'll try to post pics. ANy help is greatly appreciated