|10-30-2010 09:11 AM|
|dutch169||Instead of cutting that bumper I'll trade you my stock?|
|10-30-2010 02:18 AM|
This is what I did for front fenders.....
|10-05-2010 04:20 PM|
|10-05-2010 04:15 PM|
|10-05-2010 03:47 PM|
The DIY fender lift is another option. It will take more work, but not a ton more work. The rear lift is real easy. It took me about a half a day and gives a ton more clearance. The front lift requires a revised intake, and washer fluid bottle. That is my next project so i can stuff 35s in there on a 2" SL, 1" BL.
|10-05-2010 02:40 PM|
|IndyJeepMan||I'd like that link! And that looks just like what I wanna do ParaCAD thanks alot, was it fairly easy and what did you use to cut it?|
|10-05-2010 01:24 PM|
|ParaCAD||^^ JeepForum and their rules..strike again!|
|10-05-2010 01:20 PM|
I found this on another site. If this is what you mean.
There used to be a blog/write up of how some guy did it but I can't find it now.
|10-05-2010 09:20 AM|
|IndyJeepMan||Thanks YJ thats a good idea, and thanks Jpatches. Its work in progress for sure.|
|10-04-2010 11:41 PM|
For a thin metal edge take some electical conduet and bend it to fit the edge. The cut a slot for the metal to fit in. Weld and paint. Should give u a nice rounded edge that won't cut or dig into anything
Use electrical conduet
Nice jeep bro.
|10-04-2010 06:52 PM|
Cutting stock flares
I'm thinking in about 2 weeks during midterm break from college I'm going to delve into a few projects on my Jeep before it gets cold. Looking for advice on two particular ones,
Cutting the whole flare into a flatty set-up, and cutting the smittybuilt classic src bumper shorter (to frame almost) and welding tabs on them
Just wondering about if anyone has done it, and tips. I'm looking to cut the flares off rounded like flatties but leave the flare as well. Just wondering what i could put around the cut metal side so it doesnt look so small and dinky thin. I added that picture just so you could see what I'm talking about. I'm also probably going to get the grille hoop finished for my stinger and hopefully my bar behind the seats for the front 4 point harnesses and seat bars that run diagonal by the door.
Any ideas, or tips. I want you to be blatant and tell me I'm a jackwagon if its true.