|05-24-2007 11:36 AM|
A tummy tuck removes the stock cross member and t-case skid and replaces them with a higher, stronger t-case skid. This raises the trans and t-case which is why a body lift can be necessary.
You gain a great deal of clearance where it is needed badly. With the OEM t-case skid being right between the tires, when going over large obstacles, that's where you have a tendency to hit. A tummy tuck skid is generally much stronger and smoother as well so you have less of a tendency to catch on it and the strength to slide over without damage other than scrapes.
The procedure for installation is to support the t-case, remove old cross-member and skid, install new tummy tuck skid (purchased form Jeep Medic, nTH, 33eng). It really is that simple. You can also add an engine skid as that will give you one smooth surface running along most the belly of the heep between the axles.
|05-24-2007 11:13 AM|
|Triple88a||from what i've heard around.. you need some bl.. 1" or so and then a aftermarket skid goes under that is higher than the stock one so it pushes everything up a bit (thats where bl comes in).|
|05-24-2007 11:01 AM|
can someone please explain the steps to a tummy tuck. i have seen a couple jeeps with them and heard alot about them but am unsure were to actually start. how much would it cost to get it done somewhere locally? without raising the heighth of the diffs does it really make that much of a difference as far as overall clearance?