|11-02-2010 10:36 AM|
|TJ97WF||With the transfer case drop. I haven't done it yet, but how does that exactly work? I would think the t case is bolted to the tranny just like the tranny to the motor? I haven't pulled the skid plate down to look. So how exactly does this work?|
|11-01-2010 02:44 PM|
Also, you'll need adjustible upper or lower control arms to set the pinion angle if your lift doesn't already have that. Unfortunately, the SYE/CV/adjustible CA thing is an expensive adder to a lift, but will save wear and tear on ujoints and bearings. It will also let you tuck the t-case skid back up to the frame for more clearance.
|11-01-2010 12:16 PM|
|snwchris||Nope, not really. You need the SYE & a CV Driveshaft to help cure the strain of the u-joints. The only thing that might help would be a transfer case drop if you haven't already done that.|
|10-30-2010 11:24 PM|
I was wondering if anyone knew of a place where i can get a new driveshaft to fix the strain on my u joints with my 4" lift, but i don't have a SYE and would rather not seeing as how its a few hundred bucks, and way more work than i'd wanna tackle. thanks.