|11-18-2010 01:29 AM|
|11-18-2010 12:28 AM|
|11-18-2010 12:28 AM|
|11-18-2010 12:11 AM|
|jdhallissey||I will beg to differ in a ford 8.8 is stronger then a true 44 not a jeep 44 but a ford 44/chevy 44. 8.8 is a 1/2ton 44 is 3/4 to 1 ton setup.|
|11-17-2010 11:19 PM|
You'll need to shorten your stock DS. Ideally, a SYE/DS would be the way to go.
And Burton is right. Ford's 8.8 is much stronger than a D44.
|11-17-2010 10:56 PM|
|computeruser||The stock DS is too short for comfort already. Add in the extra pinion offset on the Explorer 8.8, and it isn't gonna be any the happier. Super-short SYE and a new rear shaft and you'll have a happy Jeep.|
|11-17-2010 09:28 PM|
I've never heard of a problem with the DS/CV needing to be shortened, and I haven't run into that problem, but I don't have a lift.
KnowWhere2Jeep has a complete installation kit for $425 that I would highly recommend to pick up. You're simply looking at $200 for the axle (try to find disc brakes and an LSD) and the installation kit. Weld up the brackets and redo the gearing if you'd like. The kit even includes a stronger cover and ZJ brake lines. That's $625 there total if you can weld yourself.
Gearing is a wash for both. Do it yourself or pay a shop and you'll pay the same both axles. The D44 really is only slightly stronger then the D35c. The 8.8 beats the D44 in terms of looking at a shortened width, and then the D60 is the next big daddy that you're looking to step up to if you're running massive 37+ tires.
|11-17-2010 09:01 PM|
|11-17-2010 09:00 PM|
|DevilDogDoc||You still need a new shaft as the yoke is different or so I have heard.|
|11-17-2010 08:58 PM|
|Cons_Table||I found a few 8.8s very close to me for 100 bucks. I was just curious if the DS issue was normal or if it just depended on the amount of lift like most DS angle issues.|
|11-17-2010 08:55 PM|
|jdhallissey||Well ya but you then you would have to do a bunch of fab work to get it to work. I mean stretch the rear out but then you changing a bunch. Why a 8.8? IF your going to go thru all of that work get a true dana 44 rear or a ford 9in for the same price.|
|11-17-2010 08:51 PM|
To all of you 8.8 swap guys...
I just recently read about possibly having to shorten your driveshaft if you do this swap. Is there a way to avoid this on the swap (other than the SYE and new d-shaft)? I was just curious if this is a normal occurence during the swap, or if it can be avoided? I will be doing this swap around the first of the month.