|02-26-2006 09:01 AM|
I am getting ready to order a RE 3.5 standard lift and install it. I know all jeeps are different, but I was wondering on all the TJ jeep owners that have installed a 3.5" lift, did you need a SYE to be installed? I am debating on ordering it all at once or installing the lift and hoping for the best. If I get the vibes order it later.
Also, with the SYE, do you need a custom length drive shaft or is there CV drive shaft that you can buy without having to take the measurement, ordering it and waiting for it to come in to install? My jeep is a day to day driver and I dont have another vehicle to drive if I have to wait for a drive shaft to be ordered.
|02-26-2006 07:22 AM|
I am getting ready to do the same install and was wondering if these instructions are pretty close to the real deal?
|02-22-2006 10:17 AM|
|ghogklr||Thanks for the replies, I've read the write-ups and it seems pretty striaght-forward.|
|02-20-2006 09:50 PM|
1BLKJP is right on the money with following the directions to the letter. Here is a link for the bumps I encountered when installing my SYE, all of my own doing. http://www.jeepsource.org/forum/show...hlight=install
Hopefully that will hope you avoid the same mistakes I made. Having decent snap ring pliers and lock ring pliers will go a long way in making the installation and removal of the stock gear a lot easier. Your going to need some very large snap ring pliers. Don't be intimidated by the install, it really isn't that difficult. I'm confident that I could do the job in two or less hours now. It is your first time doing something like this so allow yourself the better part of the day as I'm sure you are not going to rush through it. Who are you looking at getting an SYE from? I purchased mine from DC4WD, $470 shipped, but that was several months ago. It included a Terra ESS and a TW DS. IMHO a lot nicer SYE then the AA. Hope this helps.
|02-20-2006 01:49 PM|
Oh, and make sure it's in 4LO before you start so that you can make sure there's plenty of clearance on the shift rail.
|02-20-2006 11:34 AM|
|jeeperman||It doesn't require dropping the t-case, but makes the job considerably easier. If you are compitent with hand tools, and can follow directions, you can do it yourself, but it will take a few hours...|
|02-20-2006 10:22 AM|
Whats involved w/ SYE install?
How difficult is it to install a SYE? Does it require seperating and dropping the t-case?