|01-19-2011 01:41 AM|
TJ rock slider
JK rock slider
|01-19-2011 01:26 AM|
|RandyScatch||Have someone help you hold them up to the side of you jeep and mark the holes out with a china marker. then use a punch in the center so you bit doesn't run. (its ok if it does a little your gonna cover it up anyway right) Drill a 1/8 inch pilot hole then get the drill bit just big enough to let the bolts threads through and run that through. when i put my smittybilt sliders on i put rtv sealant around the holes befor bolting it on so it would cover up the bare metal from rusting. After that have someone hold them up while you bolt them on and you should be good to go.|
|01-18-2011 11:39 PM|
Help: I need an installation guide..
I have a set of Mopar Rubicon Rock Rails/Rock Sliders. Whatever you want to call them. I have all the original hardware and everything needed. I am just unsure of the size drill bit I need and whether anybody has any tips and do or do nots. I tried to contact Mopar and they just gave me the run around. Anybody out there help me?