|01-23-2011 03:34 PM|
The jounce bumper is the rubber thing in the middle - that cushions the impact of the axle to the spring tower/frame. It is designed to fully compress into the bumpstop cup.
If you don't have bumpstop extensions will you end up using the shocks as bumpstops....that means you break the shock or the shock mount. I've seen them rip off the axle or shear bar pins. If you run larger tires, you need bumpstop extension because unless you change the distance from the hub center to the fender AT FULL SUSPENSION COMPRESSION, you will damage your fenders. Not the flares, the actual steel body panels.
The primary function of the spring is to keep your bumpstops off the axle pad. Thats it. Lift springs do NOT provide clearance for larger tires...they only keep your bumpstops off the axle. Bumpstops provide clearance for larger tires, and prevent shock damage & overcompression.
Front bumpstop extensions go in the front lower spring pad:
Rear bumpstop extensions go on the rear frame side spring perch:
Otherwise you can end up with this condition:
Which will rip the shock mounts off and cause problems like this:
here's more info:
bumpstops, shock length, and tires size. help me iron out the fuzzy points.. - JeepForum.com
Jeep 3 Inch Budget Lift Installation
|01-23-2011 03:24 PM|
Please clarify. And yes I am keeping the oem front trackbar. Why did you decide to change the OEM endlinks and control arms? I was told it wasent necessary?
|01-23-2011 09:44 AM|
Keep the stock front track bar unless you plan on fighting diff cover & aftermarket track bar issues for months.
I've got roughly 25k miles or so on my OME kit. Works nicely with my setup - JKS front discos, RE rear sway bar links, Rokmen control arms & bumpstop extensions with custom track bars.
call up DPG Off-Road
|01-22-2011 11:08 PM|
|styyy||wow thats some list of acronyms,I better start studying so I learn to speak Jeep|
|01-22-2011 07:41 PM|
|01-22-2011 06:52 PM|
|01-22-2011 06:30 PM|
|Jon M||Ageless.... Are u also running discos?|
|01-22-2011 01:23 PM|
|01-22-2011 01:18 PM|
|01-22-2011 09:43 AM|
MML = Motor Mount Lift
BL = Body Lift
|01-22-2011 09:29 AM|
|styyy||Oh and to clarify I bought a OME suspension kit from 4X4connection in virginia(Nathan) and it included 4X OME coils,4X OME OME shocks,panhard bar relocator/drop bracket,OME steering damper($614+ s/h),guess I should have said $650. Definately the best deal I could find on quality stuff. Tell him Jerry E sent you.|
|01-22-2011 09:23 AM|
|styyy||Im new to all this jargon,please clarify ,BS?, MML? and I assume a BL is a body lift? I need a WF dictionary! lol|
|01-22-2011 09:18 AM|
I have a '97 with the Old Man Emu lift.
Used to run 32X11.5X15 on stock 15X8 rims with 5.5"BS and was very happy with that combo. Had some rubbing at full lock but a couple of washers on the steering stops took care of that. And no problems with the swaybar disconnected.
There wasn't much clearance in the rear wheel wells but never had any rear wheel rubbing.
Like Jp90talon above, have now added 1"MML, 1"BL and 33" tires (on 15X8 rims with 3.65"BS)
|01-21-2011 07:07 PM|
|Phil05LJ||I've been pleased with the heavy duty 2.5 ome on my LJ however, I had to go back and add a 3/4" spacer in the front because the weight of the ARB made it sag and that's without a winch on it! It rides really smooth on ruff trails, especially with the front disconnected. My 31s will stuff and clear the Rubicon flares just barely with 15x8 procomp rims. I have a JKS front trac bar that allows for a little more travel but the control arms are still stock. With aftermarket arms, 32s would likely rip off my flares.|
|01-21-2011 06:27 PM|
|01-21-2011 05:59 PM|
As for fitment of 32's on the oem rims,I bought the Jeep used and have yet to pull of the wheels,I guess its possible there are spacers behind the wheels Ill see when I do the suspension. Although the wheels dont stick out and there definately is no rubbing. I went ahead and ordered the OME kit for $700 shipped! I researched and agree you usually get what you pay for.
thanks for the info
|01-21-2011 04:37 PM|
Here's my OME lift. I love it.
|01-21-2011 04:13 PM|
|Loic||as soon as the $ is saved, ill get the lift (minus the shock,i already have tem) to replace my BB. i run 31 on my 2" BB and there is plenty of space for 32s.|
|01-21-2011 03:59 PM|
|Jp90Talon||I ran the OME kit with a 1.25" BL and 1" MML and it worked great with 33x12.5s|
|01-21-2011 01:40 PM|
I currently am running the OME kit on my 2005 Rubicon and I love it. It works great off-road and rides well on-road. I got the heavy duty springs because I have a hard top and I plan on adding a winch soon. It also works well when I carry gear in the back and doesn't sag but maybe an inch or so with that extra weight. I would highly recommend it for those looking to fit a nice set of 32's who wants to do weekend wheeling but maintain a good daily driver ride.
Edit: For wheels and tires I am running 16x8 Pro-Comp steel wheels wrapped in 32" Goodyear Wrangler MT/R's. The wheels have 4.25" backspacing so they don't stick way out.
|01-21-2011 01:39 PM|
|01-21-2011 12:07 PM|
|Jon M||I've heard nothing but praise concerning OME. The only downside is $$$$. Although you get what u pay for!!! I'm interested in their 2" lift.|
|01-21-2011 11:54 AM|
OME 2.5" Suspension and 32" tires
I have a 1999 Sahara and am in need of new springs and shocks. I bought the jeep used and it came with 32X11.5X15's mounted on OEM 15X8 canyon rims. Im interested in the 2.5" OME(Old Man Emu) kit. Anyone out there have any experience with this setup?