|01-23-2011 11:20 AM|
|01-23-2011 10:51 AM|
Is it happening when the Jeep is on perfectly level ground? If it is, the mechanism which is basically a steel ball in a steel cup is probably just gunked up. Flushing the mechanism out with WD-40, which is also a mild solvent, should fix it. You'll have to get inside the retractor to get to the mechansim, you can't just squirt WD-40 down inside where the belt winds in.
It is, however, normal for the seatbelt to be lock-prone if the Jeep isn't on level ground.
|01-23-2011 10:04 AM|
|01-21-2011 02:51 PM|
Front Seatbelt Problem
Before I dig into this myself, I was wondering if you guys may have some insight into my problem here.
The passenger seatbelt on my '00 TJ is waaaayy over sensitive on locking up. You have to pull it basically as slow as you can or else it will lock on you and sometimes you have to even yank on it a few times before it will let you do this. This is while parked also. I've known this was a problem for a while and didn't care because I don't use that seat, but now it's starting to annoy the people who ride with me the most.
Anybody know what the problem could be? I've had Mustangs up until buying my Jeep a couple months ago and all I can say is
Thanks in advance