|01-31-2011 01:37 PM|
|lancetkenyon||Spartan is made by Yukon. I run a Spartan in my front D60. I like it a lot better than any Lockright or Powertrax I have ever had.|
|01-30-2011 05:00 PM|
|01-30-2011 04:38 PM|
|SurfNaked2010||i wanna put it up front in my d30. i already have the super 35 in the rear|
|01-30-2011 03:47 PM|
I ran a spartan in my 35 for about 6 months. That was until two weeks ago when I had a little too much fun and snapped one of the pins that engage in the carrier (not sure of proper name). Luckily it has a 1 year warranty & replacement is free. I may be wrong here, but it seems like the part that broke was designed to break before the axle shafts, which would have made it a much bigger headache to get home.
Mine is not a daily driver so the locker itself may have had 300 miles in 6 months. I also know that 37's & a locker are way too much stress for the d35, so I'm sure it was completely my fault it failed. Honestly, it lasted longer than I expected.
That is my experience with it.
|01-30-2011 03:11 PM|
|01-30-2011 03:08 PM|
|Phil05LJ||I forgot to mention that I would be upgrading to the Super 35 kit. I was hoping to substitute the Spartan in place of the Detroit to save a little cash and I think it looks like a good locker . I should be ok if I have the Super 35 axles right? Thanks!|
|01-30-2011 10:17 AM|
If you're considering installing a locker into your stock rear Dana 35c axle, I can only suggest in my strongest possible opinion, don't. That axle is really not strong enough for a locker and the usual result of having installed a locker is a snapped axle shaft.
Check out this site for pics of what happens with locked Dana 35c axles... Another broken Jeep Dana 35c Rear-End.
|01-30-2011 10:12 AM|
|Arch Stanton||Where is it made? Thanks.|
|01-30-2011 08:18 AM|
i want to try this locker as well! its a new design it has no thrust washers and installation is easier than other lunch-boxes.
|01-30-2011 12:52 AM|
Sounded like a knock-off name to me at first, then I saw one for a 30 front in a YJ, looks pretty beefy... Does anyone run this brand in a rear 35?