|07-20-2007 05:55 PM|
no it doesnt move where the weight is ont the tires, it moves the tires out away from the hub a little bit, if you have properly aired up tires the weight will rest right on the middle of the tire, unless of course your axles are bent
think about it how could moving the wheels out change where the weight is, it would only happen if the axles were bowed
I---I is the same as I----I right the weight is still destubuted in the same spot on the tire just farther away
it is BS!!
|07-20-2007 05:20 PM|
This is my YJ with 4.5" backspacing. The tires stickout a little but that is due to the full width axles.
BTW it does not dance!
|07-20-2007 04:43 PM|
|07-20-2007 11:41 AM|
|daddyjeep||I am not sure where he is getting that "dancing" theory. I can't see how a different backspacing would effect how it drives at all.|
|07-20-2007 09:48 AM|
I dont know what hes talking about most people here run 3.75BS when they get 12.5's and they have no problme with "dancing around"
otherwise you run the rick of rubbbin control arms and things, the only thing i can think of is if they dont do alignments when they get a lift and bigger tires and then the car would "dance" all over, so make sure they do an alignment for you when they finish the lift
|07-20-2007 07:44 AM|
|Brian V||Im not buying the wheels and tire there. Just the lift since they have it in stock and I wont have to wait for shipping.|
|07-20-2007 06:02 AM|
Once your tire monkey mounts a tire that is 1" wider under a flare that cover 1" less, there is no way he can get it flush with the flare was my point.
I would find another shop.
|07-20-2007 02:38 AM|
|07-20-2007 01:42 AM|
|jjseel||this is 33x12.5x15 with 3.5 bs|
|07-19-2007 11:06 PM|
|Brian V||he said 4.5 and you posted 4 7/16. What would be the difference?|
|07-19-2007 11:03 PM|
Here is a 16X8 with 4 7/16 backspacing with a 33 X 11.5 tire and you can see they stick out just a little bit past the flare. The thing to know about this is that its a Rubi which comes stock with a 1" wider flare then other Jeeps. (except Sahara's)
So with a 12.5 tire and the same backspacing I really dont see how he is going to get it flush.
|07-19-2007 10:44 PM|
I called a local shop to buy a lift kit and figured I would ask about tire size while I was at it.
He told me 15x8 5x4.5 bolt pattern, which I know is correct. Then he said 4.5 on the backspacing. I asked if they would "stick out" at all. He said "nope, they'll sit flush with the wheel well". I asked about going wider, he then said "if you go wider she'll dance all over the road!".
I dont want something with a sh*tty ride, but I dont want the thing to look tall and narrow. What backspacing is good with this setup?
Maybe some pics of jeeps with 4.5 backspacing will help me???
BTW-3" lift w/33"x12.50x15" on 15"x8" rims.