|02-24-2011 09:27 AM|
Found that Autozone has an online repair manual. Cool.
That wire goes to the knock sensor that is screwed into the intake manifold just forward of the carburetor.
Now I just have to findout those two vacuum line issues.
|02-23-2011 02:32 PM|
|Garyk||Most likely Mass Air Temp|
|02-22-2011 07:07 PM|
|mcguirjf||I believe I found where the broken blue wire with white strip goes. There is a sensor that is threaded into the intake manifold just forward of the carburetor mount location. Any idea what this sensor is? Intake air temperature?|
|02-22-2011 12:51 PM|
Help with Wire and Vacuum Lines
1. I need help in finding where this blue with white strip wire goes. It runs in the wiring loom between the carb and cylinder head.
2. The next is a T fitting that is located on a vacuum line that runs between the cylinder head and fire wall.
3. The final is two vacuum lines located near the passenger side frame rail. I have a blue line that goes no where, and a brown or green line that has a rubber fitting on the end and I can't find where it goes.
I'm currently rebuilding the Carter BBD 8384 carburetor.
Any help is appreciated!