|03-04-2011 11:17 AM|
|03-01-2011 05:25 PM|
Easy to change. Just drain the TC and remove the external housing. You'll want to change the seal and the inner sleeve. I used a socket I think 30mm to drive out the bushing and a piece of PVC pipe with a cap on it to drive in the seal.
Just rebuilt the TC so I'm all too familiar with it!
Quadratec Parts List Items 30 and 32 are what you need.
Jeep® Model NP231 Transfer Case: Jeep® Transfer Case Chain, Jeep® SYE Kit, Jeep® Drive Shaft Angle Reduction Kit, Jeep® Transfer Case Rebuild Kit - Quadratec
If you like spending money on tools like I do pickup one of these...money well spent!
Harbor Freight... 10 Piece Bearing Race and Seal Driver Set
|03-01-2011 04:30 PM|
Transfer case output shaft seal
Hey guys,the transfer case on my YJ is leaking from the output shaft seal ,will I be able to change it without too much troubel ? I have done many seals on transmissions ? I searched and didnt find much about it on here.Thanks in adavance for any input on this.