|03-04-2011 03:04 PM|
Ohhh that sucks man I'm sorry.
Try to keep this one dry lol
|03-04-2011 02:02 PM|
|Yjwolf||Pic is worth a thousand words....|
|03-04-2011 11:23 AM|
Cool. That's probably a warranty thing too.
You'll probably be ok with it. Remans act kinda weird, like shift hard, or they'll shift in a weird spot, but they usually work. So long as it doesn't slip or transfer power bad, you can treat and maintain them as you would a regular automatic.
If you're far into that warranty, maybe 5,000 miles or more you can have the mechanic check it out now. It'll save a trip, and anything bad going on should be showing itself in the pan or mesh by now. But if you only have a couple hundred or so I'd wait.
Another thing I'd try for piece of mind is at 12,000...see if they'll extend the warranty. It's not uncommon for shops to be willing as a reman hitting that marker with no slipping, debris, or fluid discoloration is a strong sign of a good build.
How did the original get messed up?
|03-04-2011 09:56 AM|
|Yjwolf||Well the seal between the trans and transfer case is leaking so I'll be running it back to get that fixed.|
|03-04-2011 08:32 AM|
A little before the warranty is up, return the vehicle to the transmission builder or place you purchased the trans. Have them drop the pan. If there's clutch material, or metal, burnt fluid, whatever...they will see it, and you'll be under warranty still. If the pan is clean, and fluid looks good I'm sure you'll be ok.
Ignore my advice about a flush between 1-2000 miles. I didn't know if you built it or what. I'd do what I said in this post. Reason being is because if you have it flushed and drained, it can be used as an excuse if anything goes amiss with the transmission
|03-03-2011 09:22 PM|
|Yjwolf||12,000 miles or 12 months.|
|03-03-2011 07:10 PM|
|GroundHawg||Did you get any type of warranty? Like 5,000 or 10,000 miles?|
|03-03-2011 03:54 PM|
|Yjwolf||Thanks. I better not have any probs for what I paid to have it rebuilt|
|03-03-2011 12:34 PM|
I would drop the pan between the first 1,000 and 2,000 miles. You'll know if a headache is in your future by what's in there.
After that, I'd use regular 30,000 mile intervals.
Technically I don't believe a "break in" is required on remans. I would though just to ease my mind the trans was rebuilt correctly
|03-03-2011 08:56 AM|
|03-02-2011 06:59 AM|
|03-01-2011 10:03 PM|
Trans fluid after rebuild
When should you change the ATF after a rebuild?