|03-14-2011 09:51 PM|
|chensley||I luled at the title and all the responses. You go girl|
|03-14-2011 08:30 PM|
|03-14-2011 03:11 PM|
|03-14-2011 12:54 PM|
|03-14-2011 12:53 PM|
|03-14-2011 12:26 PM|
You can double check the Clutch fluid levels and the Gear Oil in the transmission too. But probably a synchro issue.
Back in the Day we used to call clutchless shifting "speed Shifting."
|03-14-2011 12:22 PM|
|Captnrich||Welcome, Where are you located? There is a great Jeep/transmission shop here in Ft. Lauderdale.|
|03-14-2011 12:21 PM|
Have to throw a "Rev" in there when downshifting to match the road speed.You are basically shifting without the synchronyzer like a Tractor Trailor.
Costwise it aint gonna be cheap.
Reinstall in vehicle
|03-14-2011 12:17 PM|
|jeepers29||Welcome and hope it all works out for you.|
|03-14-2011 12:14 PM|
While in gear, depress clutch pedal and shift into neutral, release clutch pedal
Depress clutch pedal, shift into next desired gear, release clutch pedal.
This might give you a little more information regarding the transmission:
pick through some of the articles on there and see if you can learn anything new. I'll be honest, Im a dude and a few years back I didn't know much about the inner workings of automobiles, went on howstuffworks and learned quite a bit.
hope this helps
|03-14-2011 11:48 AM|
|Glenn91YJ||It makes sense that your having problems with both those gears. 3rd and 4th are one syncro sleeve on the same shift fork. I doubt both syncro cones went out at the same time. Maybe a shift fork problem or maybe the syncro sleeve on that fork is cracked/shattered. Definitely sounds like a transmission problem.|
|03-14-2011 11:44 AM|
What is 'double clutching'?
Are synchros something that is gonna cost an arm and a leg?
|03-14-2011 11:12 AM|
So its grinding while shifting into 3rd and 4th? Have you "double clutched" to shift? Probably synchros.
Edit: someone beat me to it
|03-14-2011 11:10 AM|
|kik||Chances are on a 93, due to the mileage, etc., it probably needs synchros. The clutch is probably fine since you are able to shift into other gears without a problem.|
|03-14-2011 10:58 AM|
Transmission question. (newbie+girl=NEED HELP)
I just picked up my 93 jeep this past weeked and I have yet to take it to a mechanic (don't ask). The car has a brand new clutch and the former owner informed me that I had to "learn" how to shift into 3rd.
I've had many stick cars in my life so Im by no means new to gears, however I am having trouble shifting into 3rd and 4th. it makes the same sound as if I was trying to shift gears without the clutch and it pains me! I mentioned the new clutch because I am not sure if that might have something to do with it or could it be the transmission? No problems going into 1st, 2nd, 5th, or R. only 3rd and 4th.
Any ideas or suggestions?